How do you open the liftgate on a Subaru?

Opening the Liftgate on a Subaru
To open the liftgate on a Subaru, you have a few options depending on the model and features of your vehicle. Here are the common methods:
1. Using the Key Fob:
– Press and hold the liftgate button on your key fob for a second or two. This will activate the power liftgate and it will open.
2. Using the Power Liftgate Button:
– If you are standing at the rear of your Subaru, make sure the doors are unlocked and/or have your key fob with you.
– Locate the power liftgate button on the underside trim above the license plate.
– Press the power liftgate button to open the liftgate.
3. Manually Opening the Liftgate:
– In case of a power failure or other issues, you can manually open the liftgate.
– Access the rear of your Subaru from one of the doors.
– Remove the trim piece and locate the manual latch.
– Use a tool like a screwdriver to throw the lever and open the liftgate.
Remember, it’s important to ensure that your Subaru’s doors are unlocked before attempting to open the liftgate. Additionally, if you hear three beeps, it means your vehicle is still locked.
I hope this helps! Let me know if you have any other questions.

Where is the trunk release on a Subaru?

Pressing the large button centered above the rear licence plate is the only way to open it. (Plus there is an emergency release lever on the inside of the hatch behind a cover plate if the main battery is dead).

How do you manually open Subaru hatch?

It right there you go from the left side. And press it against the subaru. And once that done you just push it open. This time it didn’t fully unlock so we gotta press a little bit more. And go up.

How do you open a power liftgate?

It. First approach the rear of your vehicle with your key fob in close proximity. As you get within six feet the logo projection turns on automatically. And it will stay on for 60. Seconds.

Why is my automatic liftgate not working?

A lift strut issue, a malfunctioning power hatch, and a bad switch or button are some of the common reasons why a power liftgate may malfunction. The buttons, fuses, and electrical connectors must be inspected to diagnose a power liftgate issue.

How do you manually open a Subaru trunk?

So go ahead. And pull the top lever. Up we’ll go outside the vehicle. You can see that it’s open.

How do you open the back hatch on a Subaru?

And pressing the button will cause the gate to reopen to open the gate from the rear of the vehicle make sure the doors are unlocked or that you have the fob with you. Press the button on the

Why won t my subaru outback tailgate open?

You will want to open and close all doors and the hatch. Lock and unlock the vehicle and try it again. If it is still an issue then try a reset of the liftgate module. You can do this by disconnecting the battery (both positive and negative terminals).

Why is my lift gate not working?

The most common liftgate issues can be traced back to the motor or motor start solenoid. If you hear a clicking noise when the switch is activated, more than likely you have a bad solenoid. Using a small jumper cable, bypass the solenoid by putting direct power to the motor to see if it will run.

How do you reset the rear hatch on a Subaru?

How to reset your Subaru rear hatch. When this issue is occurring, the car will beep three times each time you press the rear gate button. The natural response is to release the button once the car beeps. To reset the rear door, keep holding the rear hatch release button until you hear a soft “thuck”.

Where is trunk button located?

Most car models have a button or lever on the dashboard or in the front seat area that opens the trunk. If you’re in the front seat, you can easily push the button or pull the lever to pop the trunk.