How do you open the fuse box on a Subaru?

Opening the Fuse Box on a Subaru
To open the fuse box on a Subaru, you can follow these steps:
1. Locate the fuse box: The fuse box in a Subaru is typically located behind a cover to the left of the steering wheel in the passenger compartment.
2. Remove the cover: Once you have located the fuse box, you can remove the cover to access the fuses. The cover may have clips or screws holding it in place, so you may need to use a tool or your fingers to remove it.
3. Identify the desired fuse: Once the cover is removed, you will see a diagram or map of the fuse box layout. This diagram will indicate the location and assignment of each fuse. You can refer to this diagram to identify the specific fuse you need to access.
4. Replace or inspect the fuse: If you need to replace a fuse, you can gently pull it out using a fuse puller or a pair of needle-nose pliers. Inspect the fuse to see if it is blown or damaged. If necessary, replace the fuse with a new one of the same amperage rating.
5. Put everything back: After replacing or inspecting the fuse, make sure to put the cover back on the fuse box securely. This will help protect the fuses and ensure proper functioning of the electrical system.
Remember, if you are unsure about any step or if you need assistance with electrical work, it is always recommended to take your car to an authorized Subaru dealership for professional help.
I hope this helps! Let me know if you have any other questions.

How do you remove a fuse box plug?

And here we have our fuse. So if your appliance is not working we’ve got no thermal damage here in the plug so we’re just going to change this fuse. Now just to make sure that the fuse hasn’t blown.

How do you open a fuse tube?

And a spare fuse on the other. You can use a small screwdriver. Or a ballpoint pen to slide this door open and see the fuses. Inside.

Where is the secondary fuse box?

The secondary under-hood fuse box is next to the battery. To open it, push the tabs as shown. If something electrical in your vehicle stops working, check for a blown fuse first. Determine from the chart on pages and , or the diagram on the fuse box lid, which fuse or fuses control that device.

How do you get to the interior fuse box?

Show you what every fuse is and what it does what the amperage is and what it controls. Now remember I said the cigarette mirror. Right there is that fuse it’s a 20 amp cigarette mirror fuse.

How do you open a fuse box cover?

And you can use a cloth if you want to or a paper towel or anything. That’s just more for trying to protect the plastic here when you’re removing. It. Um so it’s got a little fuse.

How to replace Subaru main fuse?

5 Steps To Changing A Blown Fuse

1. Step 1: Check Owner’s Manual.
2. Step 2: Turn Engine Off & Disconnect Battery.
3. Step 3: Open Fuse Box & Find Fuse.
4. Step 4: Remove & Inspect Fuse.
5. Step 5: Insert New Fuse.

How do you open the fuse box in a car?

To remove the fuse box lid, put your finger in the notch on the lid, pull it toward you, and take it out of its hinges. The fuses are located in five fuse boxes. The interior fuse boxes are located under the dashboard on the driver’s and passenger’s side.

How do you know if a fuse is open?

As we can see this fuse has blown. Now you are probably wondering what causes a fuse to blow. The fuse blows when there is more current or voltage flowing through it than it is rated for electrical.

How do you open the fuse box on a Subaru Forester?

And you can actually pop it right off little clips and you’re looking right at the fuse panel in here. And it tells you right here what the fuses are so that points to the top.

Where is the inside fuse panel?

Usually, you will find two fuse boxes in the car. One is located under the hood and the other is found in the dashboard or near the steering wheel.