AHG Auto Service » Make » Ford » How do you open the bonnet on a 2014 Ford Transit Custom?

How do you open the bonnet on a 2014 Ford Transit Custom?

To open the bonnet on a 2014 Ford Transit Custom, you can follow these steps:
1. Make sure the handbrake is engaged and the ignition is turned off.
2. Allow the engine to cool for about 10 minutes.
3. Reach under the dashboard and locate the bonnet release lever.
4. Pull the lever to pop open the bonnet.
5. Lift the bonnet slightly and locate the release catch.
6. Slide the release catch to the left.
7. Lift the bonnet fully and prop it up safely.
8. To close the bonnet, hold it up with one hand and release the strut with the other.
9. Lower the bonnet slowly, keeping it about 30 cm away from the body, and let it drop to lock it.
Please note that if the bonnet release mechanism is seized or not functioning properly, you may need to use alternative methods to open the bonnet. In such cases, it is recommended to refer to a professional or consult the vehicle’s manual for specific instructions.
I hope this helps! Let me know if you have any other questions.

How do you open a stuck Ford Transit bonnet?

And basically what you do. You get your key. You. Put it in this thing. And you turn that now if they’re always stuck. The mechanism fixes that freezes off wait don’t freeze up but it’s different off.

How do you get into a transit custom bonnet?

To open the bonnet on a Ford Transit. It’s not like most of our vehicles. Where you have a release lever inside the cabin. But on these you have to use the key on some models you flip up the badge.

Why can’t i open my bonnet?

How to open a stuck bonnet

  • Get some help. Ask an assistant to push down at the front of the bonnet (gently but firmly) while you pull on the release lever again.
  • Pull the cable manually. Take a closer look at the release lever.
  • Work through the grille.
  • Jack up the car.

Where is the button to open the bonnet?

Which can normally be found in the drivers footwell area or on the opposite side in the passenger’s foot. Well pull the lever towards you until you hear the bonnet release.

How do you open the bonnet on a 2014 Ford Transit?

Hand. This is where the Bonnet stand is located. And clip the bonus stand. And place it into this group. Here is a closer look at the safety latch.

How do you open the bonnet on a car from the outside?

Up some cars have built-in mechanical gas arms that holds the hood in place but here we also have to secure it in an upright.

How to open transit custom without key?

It. So you kind of feel it like that put your hand like that and then rotate it or yank it back. Okay so i just popped. It. So now i pull. My tool out release my airbags.

Where is the hood release on a 2013 Ford Transit?

Again for transit 2013. Model that is how. You. That’s how you pop the hood.

Where is bonnet release on Ford Transit Custom?

Reach under the dash and pull the lever. The bonnet will pop open. Lift the bonnet slightly and feel the release catch, then slide it to the left. Lift the bonnet fully, then prop it up safely.

Why won’t my bonnet open?

There are 3 main reasons why you can’t open your car bonnet/hood. First, sometimes the bonnet gets jammed, second, the lever can sometimes become faulty, and thirdly it could be a broken cable causing this problem to occur. Sometimes your car bonnet can get jammed and then fail to open when you pull the open lever.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment