How do you open a Subaru crosstrek key fob?

Opening a Subaru Crosstrek Key Fob
To open a Subaru Crosstrek key fob, follow these steps:
1. Locate the Hidden Key:
– The Subaru key fob contains a hidden physical key inside it, which can be used to unlock the car in case the fob’s battery is dead.
2. Access the Battery Compartment:
– For newer Subaru key fobs with a rectangle shape, you can access the battery compartment by following these steps:
– Push the small silver tab on the back of the key fob and pop out the metal key.
– Insert the tip of the key or a flathead screwdriver into the gap between the front and back of the key fob to open the cover gently.
– Locate the battery, which could be located on the other side of the transmitter circuit board.
3. Replace the Battery:
– Once the key fob is open, you can replace the battery with a new one. For most Subaru key fobs, a CR2032 button cell battery is required.
Remember to handle the key fob carefully to avoid damaging it during the process.

How do you start a Subaru crosstrek with a dead key fob?

Itself. And press it right up against the push to start. Button. Now what this does is allows the car to still read the chip that’s inside the key fob even though it’s not transmitting.

What kind of battery for Subaru Crosstrek key fob?

2032 lithium battery
The Subaru key fob battery type is a 2032 lithium battery in newer rectangular designs, a 2025 lithium battery in older teardrop designs, and a 1620 lithium battery in the older exposed-metal-key design.

How do you open a Subaru key fob to change the battery?

So instead go in through here. And kind of pry up on the key gently pry back and forth until it comes apart it shouldn’t take a whole lot of effort to break it loose.

How do you pop open a key fob?

Until we’re able to split. Open once open you’re gonna have access to the battery. You may need your flat object as well to remove the battery by turning the battery.

How do you separate a Subaru key fob?

And you’ll hear the little pop. Pull the back your key.

Can you start a Subaru with a dead key fob?

Hold the key and push the start button with your key. You’re car is going to start then go to your subar dealership. And get a new battery put in all right thanks for watching.

How do you take apart a Subaru crosstrek key fob?

Open. Just like that and you’ll see the battery is in here. So you just take this battery out replace it with a new battery. This is the one you need CR2032.

How long do Subaru key fob batteries last?

When to Replace Your Key Fob Battery. How long your key fob battery lasts depends on several factors such as how often you use it, your climate, and if the battery has been replaced before. A new key fob battery should, on average last a few years before you need to replace it.

What is the best battery for a Subaru key fob?

Requires a 2032 Battery
It may be helpful to insert a flathead screwdriver into the seam between the two halves of the fob.

How do you open a key fob to get the key out?

So if i slide this this way. And i hold it there. Okay i can actually pull out a hidden. Key check that out. So right here is the hidden. Key for the key fob.