How do you mount the front license plate on a Subaru crosstrek?

Mounting the Front License Plate on a Subaru Crosstrek
To mount the front license plate on a Subaru Crosstrek, there are several options available. Here are some methods that Crosstrek owners have used:
1. Using a Universal License Plate Kit: One Crosstrek owner on Reddit shared their solution of using a universal license plate kit, which includes special small screws and a tool for mounting the license plate. They also used a silicone license plate frame that came with black plastic caps to protect the screws.
2. Using a Front License Plate Frame/Bracket Assembly: Another option is to use a front license plate frame/bracket assembly specifically designed for Subaru Crosstrek models. This assembly provides a sturdy and elevated mounting for the license plate, protecting it from damage. It can be purchased online from websites like MyCarWorx.com or SubaruOnlineParts.com.
3. Using the Manufacturer-Provided Holes: Some Crosstrek owners have reported that the front bumper of their vehicle already has two manufacturer-provided holes that are wider than a US license plate. In this case, the license plate can be mounted directly using screws.
4. Using a Tow Hook Mount: There are also mounts available that screw into the front tow hook spot of the Crosstrek. This option allows the license plate to be mounted off to the side, giving a unique look. However, it’s important to note that this method may not be legal in all states.
It’s worth mentioning that the availability and compatibility of specific mounting options may vary depending on the model year of the Subaru Crosstrek. Therefore, it’s recommended to check with the manufacturer or consult the vehicle’s manual for the most accurate and up-to-date information.
Please note that the information provided above is based on user experiences and discussions found in online forums and communities. It’s always a good idea to consult the vehicle’s manual or contact a Subaru dealership for the most accurate and specific instructions for your particular Crosstrek model.
I hope this helps! Let me know if you have any other questions.

How do you fasten a front license plate?

But you don’t want to over tighten. Because you are attaching metal screws into plastic stick. And you don’t want to strip that attachment point now your mounting bracket is attached to the vehicle.

How do you install a front license plate without drilling holes?

You could try an adhesive-mounted bracket or a bracket designed for the shape of your specific model’s bumper. There are also brackets that fit into the tow hook anchor located on the front bumper of many newer models.

Can you drill new holes for number plates?

Drill holes for the screws
(Alternatively, you may clamp the old plate in place over the new one as a jig to get the right placement for the holes.) Place the number plate on a piece of scrap wood and then carefully drill each hole through the plate in one go.

Where is the compliance plate on a Subaru?

A compliance plate is usually found in the car’s engine bay, door pillar or footwell. In some cases, there might be a significant difference between the build and compliance plate dates due to shipping and storage time of the particular vehicle.

How do you put a front license plate on a Subaru crosstrek?

And they’re about the size of a pinpoint. So there’s one here. And one right there that is where you’re going to screw. Your screws in to mount your license plate. So it’s very easy to do i suggest.

What size Screws for Subaru Crosstrek license plate?

16mm
Black Oxide Finish for a Great Look. These Screws will Outlast Your Car. CORRECT LENGTH: These 16mm (5/8 in) Screws are Perfect for both Frame and Frameless Installations.

Do I need special screws for license plate?

There are no special screws made for license plate. The screw to be use will depend on the mating interface spec ie the nut. But it is recommended to use and anti vibrating fastener such as flange bolts and flange nut or nyloc insert bolt.

What if my car doesn t have a front license plate holder in California?

Not having a front plate is against the law in California, and the infraction is punishable by a fine of $197.

How do you use license plate screws?

Upgrading. So all you do to put your new plate on is hold it up on these and line up the holes finger tighten. The screws and then tighten it down with your. Screwdriver.

What screws do I need for a front license plate?

Although there are different sizes of license plate screws, the most common license plate screw size is 1/4-14-3/4. The fraction 1/4 indicates the screw’s threaded diameter in inches, the middle number 14 equals the number of threads, and the 3/4 fraction indicates the screw’s length in inches.