To lower the spare tire on a Dodge Ram, you can follow these general steps:
1. Attach the wheel wrench to the jack extension tube.
2. Insert the tube through the access hole located between the lower tailgate and the top of the bumper, and into the winch mechanism tube.
3. Rotate the wheel wrench counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle.
Please note that the exact process may vary slightly depending on the specific model and year of your Dodge Ram 1500. It’s always a good idea to consult your vehicle’s owner’s manual for detailed instructions and safety precautions.
If you’re still having trouble or need further assistance, it’s recommended to schedule a service appointment with a Dodge service center or contact a professional mechanic for help.
I hope this helps! Let me know if you have any other questions.
Contents
- How do you get the spare tire off a 2017 Ram 1500?
- How do you lower the spare tire on a Ram 1500?
- How do you jack up a truck to change a tire?
- Where do you put a jack under a truck?
- Can you drive on a low spare tire?
- How do you lower a spare tire?
- Can you change a tire without jacking it up?
- How do you get the spare tire off a Ram TRX?
- How far can you drive on a Dodge Ram spare tire?
- How do you lower the spare tire on a 2015 Dodge Ram?
How do you get the spare tire off a 2017 Ram 1500?
Insert the tube through the access hole between the lower tailgate and the top of the bumper, and into the winch mechanism tube. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle.
How do you lower the spare tire on a Ram 1500?
Let me show you jack in your tire iron are here under the passenger seat you’re going to want to grab this piece of plastic pull harder than you think you need to to the right of your trailer hookups
How do you jack up a truck to change a tire?
Raise the truck up by fitting a jack under it.
Lift it so the wheel is about 6 in (15 cm) off the ground. For safety, position the jack along a metal part of the frame rather than the plastic exterior. Check the owner’s manual if you are unable to locate the jack point just by looking at the truck.
Where do you put a jack under a truck?
On a heavier truck like this we’re going to aim for the rear axle. And when we go to the front we’re going to aim for the front axle.
Can you drive on a low spare tire?
If the spare tire’s tread depth is too low, it might compromise your vehicle’s stability and handling. The reduced traction and handling capabilities of a spare tire can make your vehicle more vulnerable to skidding or loss of control.
How do you lower a spare tire?
Catch. Now take the lug wrench. And using the square hole attach it to the end of your bar. Turn clockwise to start lowering your spare. Tire.
Can you change a tire without jacking it up?
If you have the proper tools, enough physical strength, and an extra pair of hands, you can use a simple machine like a lever in place of a jack when you need to fix a flat. Find a metal pole or similarly shaped, sturdy object and a large rock, block or other heavy object to use as a fulcrum.
How do you get the spare tire off a Ram TRX?
Boy. It brings the spare boy. Down look at that right there isn’t she beautiful.
How far can you drive on a Dodge Ram spare tire?
Spares cannot be driven over 50 miles per hour. Spare tires shouldn’t be driven for more than 70 miles. You’ll have less traction than with a full-size spare.
How do you lower the spare tire on a 2015 Dodge Ram?
Tire. Now while the truck is still on the ground loosen.