How do you lock a Subaru without an alarm?

To lock a Subaru without activating the alarm, you can follow these steps:
1. Ensure all doors and the trunk are closed, except for the driver’s side door.
2. Use the lock button located on the driver’s door (below the window control button) to lock the car.
3. Make sure you have the valet key in hand.
4. Close the driver’s side door. The Subaru alarm won’t set for a few minutes.
5. To disable the alarm for the front door, use the valet key to unlock it. Insert the key into the keyhole on the driver’s side door and turn it to the right.
6. Once the key is turned, you will feel a click, indicating that the alarm is disabled for the front door.
Please note that this method may vary depending on the specific Subaru model and year. It’s always a good idea to consult your vehicle’s owner’s manual for the most accurate instructions.
Source:

How do I disable my Subaru car alarm?

Side of this. And open the door. And you’ve got to wait be patient again it takes about 10 seconds. And you’re going to hear the car beep at you twice.

What sets off a Subaru car alarm?

The alarm is triggered by opening a door or the rear gate.

Do Subarus automatically lock?

The owner’s manual states that there’s a timed auto lock feature where if the car is unlocked for more than 60 seconds, it will automatically lock if a key is not present inside.

How do I permanently turn off my car alarm?

However, should you need to disconnect your car alarm, you will need to unlock the vehicle, start the electrics of the vehicle, remove the fuse and/or transformer connected to the alarm, then disconnect the battery of the car.

What are the three main ways to disable the vehicle alarm?

How to Shut Off a Car Alarm That Won’t Quit

• Using Keys or a Key Fob.
• Removing the Alarm’s Fuse.
• Disconnecting the Battery.

How do I disarm my Subaru Outback alarm?

Go of the unlock button. So I’m gonna press and hold it then immediately open the door I’m gonna keep holding it down for a full 10 seconds.

How do you lock a Subaru with fob?

Symbol. You hear the two beeps that means it just unlocked. And then when you want to lock your door you hit this top button that looks like a lock one beep means it blocked.

How do you lock a Subaru?

Close all doors including the rear gate. And touch the door lock sensor on the door handle while carrying the key fob. You can also do this by pressing the rear lock button on the gate.

Why does my Subaru car alarm go off when I open the door?

You probably have a theft prevention button that’s turned on in the vehicle so when you open a door it will go off or if you don’t have one then if you are in a turned off car on the inside and you hit the unlock button from the inside then it will go off once you open the door because its to prevent theft.

Why does my car alarm go off when I lock it?

Its because you probably used the fob to lock it and when you do that, the fob also arms the security system. the alarm will also go off if you get inside the car, then lock it with the fob, then open the door. Try locking your door with the key instead of the fob, and the alarm will not go off when you unlock it.