How do you lift a 2014 Ford Focus?

How to Lift a 2014 Ford Focus
If you’re looking to lift a 2014 Ford Focus, there are a few options available to you. Here are some methods that you can consider:
1. Suspension Lift Kit: One option is to install a suspension lift kit. These kits typically include components such as taller springs, longer shocks, and other necessary hardware to raise the vehicle’s suspension. Some aftermarket companies offer lift kits specifically designed for the Ford Focus.
2. Coilovers: Another option is to install coilovers, which are adjustable suspension components. By adjusting the height of the coilovers, you can effectively lift the vehicle. However, it’s important to note that not all coilovers are designed for lifting purposes, so make sure to choose ones that are compatible with lifting the Ford Focus.
3. Strut Spacers: Installing strut spacers is another method to lift the Ford Focus. Strut spacers are placed on top of the front or rear struts to increase the ride height. This method is relatively simple and cost-effective compared to other options.
It’s important to note that lifting a vehicle can affect its handling and stability. It may also impact the warranty and insurance coverage, so it’s recommended to consult with a professional mechanic or automotive specialist before proceeding with any modifications.
Please keep in mind that the information provided is based on general knowledge and online sources. For more specific and detailed instructions, it’s always best to consult the owner’s manual or seek advice from a professional.
I hope this helps! Let me know if you have any other questions.

Where are the jack points on a 2014 Ford Focus?

Jacking points are very important. Look under the rocker panels, and look for the double-seam-welded sections. They’re about 8 inches from the back of the front wheel wells, and 6 inches from the front of the rear wheel wells. You may also use the area on the front subframe where the lower transmission mount bolts up.

How do you find car jacking points?

Between these notches. Here’s an older BMW. And this is really easy to tell this holds the Bourbon I can’t find jack points anywhere. So you’re gonna have to go under the frame. That’s easy to find.

Where do you put the jack on a Ford?

Stand. You can now remove the wheel if needed for safety slip it under the vehicle as additional protection.

Can you put a lift kit on a Ford Focus?

This Complete Lift Kit is compatible with: Ford FOCUS (1, CAK) 1999 – 2004. Ford FOCUS (North America, SVT/ZX3, ZTS/LX/SE/ZX4, ZX5, ZTW/ZXW, S, SE, SEL, SES) 1999 – 2011.

Can you jack up a Ford Focus from the front?

But as far forward as possible underneath. The front doors. So we put the jack in to approximate. Position and what we want to do at this point is make sure there’s enough room left.

Where is the lift axle?

The most common configuration in the UK is a mid-lift axle – this is where the rearmost axle on a 6×2 tractor unit is the drive axle and the one in front of that is the lift axle. If the lift axle is behind the drive axle, it’s called a pusher axle.

Where do you put the axle stands on a Ford Focus?

The rear ones are marked on the car, if you look along the skirts at the rear there is an arrow to point you in the right spot. The front you can’t miss if you get down and have a quick look. Just use the rear ones and look for a similar area of land at the front.

What is the ground clearance of a 2014 Ford Focus?

Ambiente, 1.6L, 6 SPEED AUTOMATIC

Dimension	Metric	Imperial
Ford Focus Height	1484 mm	4 ft 10 in
Ford Focus Width	1823 mm	5 ft 12 in
Ford Focus Length	4358 mm	14 ft 4 in
Ford Focus Ground clearance unladen	100 mm	4 in

Where do you put the jack to lift the front?

Your owner’s manual should give you the location of jack points. Usually there’s one on each side behind the front wheels and in front of the back wheels, close to the rocker panels. There may be central jack points located behind the bumpers (front and rear).

Is a car safe on axle stands?

These are critical safety items that should come from reputable and trustworthy sources, as being crushed by your car is not the way to go. Cheaping out with axle stands is a fast track to a mere feeling of safety, rather than possessing actual safety. Axle stands should be sturdy with a good wide base.