How do you jack up a Ford Focus ST?

How to Jack Up a Ford Focus ST
To jack up a Ford Focus ST safely, you need to locate the proper jacking points and use jack stands for support. Here’s a step-by-step guide:
1. Locate the jacking points: On the underside of the rocker panels, you will see two little triangles pointing to the pinch welds. These are the recommended jacking points for the Ford Focus ST.
2. Position the jack: Place the jack under the pinch welds at the jacking points. Make sure the jack is centered and secure before lifting the car.
3. Lift the car: Slowly pump the jack handle to raise the car off the ground. Be cautious and ensure the car is stable before proceeding.
4. Place jack stands: Once the car is lifted, position jack stands under the pinch welds or at the pivot points for the front control arms. This will provide additional support and prevent the car from falling .
5. Lower the car onto the jack stands: Carefully lower the car onto the jack stands until it is securely seated. Gently shake the body to ensure the jack stands are properly positioned.
Remember to engage the parking brake while jacking up your car and take necessary safety precautions. Never get under the vehicle while it is jacked up, especially without using jack stands .
Please note that the information provided here is a summary of the search results and should be used as a general guide. For more detailed instructions, it is recommended to refer to the owner’s manual or consult a professional mechanic.
I hope this helps! Let me know if you have any other questions.

Where do I put the jack to lift my car?

To raise the vehicle first position the jack under the car chassis at an appropriate lift. Point pump the jack until it comes into contact with the lift point on the frame.

What is the ST in Ford Focus ST?

ST stands for Sports Technologies and serves as an improved version of the company’s traditional models. While most famous for its use on the Focus, it has also been added to the Fiesta and Mondeo to great effect in the past.

How do you know where to put a jack on a car?

Locate the jack point on the vehicle
Your owner’s manual should give you the location of jack points. Usually there’s one on each side behind the front wheels and in front of the back wheels, close to the rocker panels. There may be central jack points located behind the bumpers (front and rear).

Where to jack up Fiesta ST?

And we’ll show you where we place our jack. Stand. Basically go right. Back. Right in the center of the subframe.

Where is the jack on a 2016 Ford Focus?

The acceptable jack stand locations are the reinforced areas of the rocker panels (the same locations for jacking), the rear subframe, and the rear-most mounts of the front control arms. The front subframe lifting point is unacceptable for support with a jackstand due to being off-center.

Where should you put the jack on your car?

Today we’re going to show you how to jack up a car safely. So that you can do it at your own home first tool that we’re going to use is a wheel chock for safety purposes.

Where is the best place to put jack?

Locate the jack point on the vehicle
Your owner’s manual should give you the location of jack points. Usually there’s one on each side behind the front wheels and in front of the back wheels, close to the rocker panels. There may be central jack points located behind the bumpers (front and rear).

Where are the jack points on a 2016 Ford Fusion?

But it’s a bit too medial to the vehicle. And the trolley Jack I’m using is on the smaller side like I mentioned before you can use the side metal piece here as the jack point as. Well.

Where do you put the jack on a Focus ST?

The jack locations are indicated by arrows on the plastic trim of the car the jack stains can be placed directly under the lower control arm pivot bracket the layout is identical on the other side.

Where do you put the jack on a Ford?

Stand. You can now remove the wheel if needed for safety slip it under the vehicle as additional protection.