How to Jack Up a 2013 Ford Fusion
To jack up a 2013 Ford Fusion safely, follow these steps:
1. Locate the Jack Points: The jack points on a 2013 Ford Fusion are designated spots where you should place the jack. Two pinch weld locations should be visible right behind the front tires or in front of the back tires.
2. Prepare the Vehicle: Park your Ford Fusion on level ground, preferably on concrete. Avoid jacking up the car on soft surfaces like grass, soil, gravel, or sand.
3. Assemble the Jack Kit: Most Ford jack kits include the jack, a jack handle, and a lug nut wrench. Make sure you have all the necessary components.
4. Position the Jack: Line up the jack with the lifting points of your Ford Fusion. If you have side skirts on your Fusion, use a hockey puck or a block of wood to extend the distance between the jack and the side of your car. This will prevent the jack from damaging or crushing the side skirts.
5. Lift the Vehicle: Use the jack handle to raise the vehicle until the desired height is reached. Make sure the vehicle is stable and secure before performing any work.
Remember to consult your owner’s manual for specific instructions and to ensure you are using the correct lifting points for your particular model of Ford Fusion.
I hope you find this information helpful! Let me know if you have any other questions.
Contents
- Where do I put the jack under my car?
- How do you jack up a car with a hydraulic jack?
- Where do you put a jack stand?
- Where do you put the jack on a Ford?
- Where do I put the jack to lift my car?
- How do you jack up the front of a car with a floor jack?
- Where should you put the jack on your car?
- How do you jack up a 2013 Ford Focus?
- Where do you put a lift jack under a car?
- Where do you put the jack under a Ford Fusion?
Where do I put the jack under my car?
Locate the jack point on the vehicle
Your owner’s manual should give you the location of jack points. Usually there’s one on each side behind the front wheels and in front of the back wheels, close to the rocker panels. There may be central jack points located behind the bumpers (front and rear).
How do you jack up a car with a hydraulic jack?
So what you need to do is make sure that the valve is tight that will ensure that the hydraulic fluid. Goes from this cylinder.
Where do you put a jack stand?
Place the jack stand under the car frame at reinforced point or “pinch weld” near where the jack is placed. Pin-type jack stands use locking pins to adjust the height, while screw-type jack stands use adjustable screws.
Where do you put the jack on a Ford?
Stand. You can now remove the wheel if needed for safety slip it under the vehicle as additional protection.
Where do I put the jack to lift my car?
To raise the vehicle first position the jack under the car chassis at an appropriate lift. Point pump the jack until it comes into contact with the lift point on the frame.
How do you jack up the front of a car with a floor jack?
So what you need to do is make sure that the valve is tight that will ensure that the hydraulic fluid. Goes from this cylinder. Into the jack.
Where should you put the jack on your car?
Today we’re going to show you how to jack up a car safely. So that you can do it at your own home first tool that we’re going to use is a wheel chock for safety purposes.
How do you jack up a 2013 Ford Focus?
Strong good solid place right here to put your jack. Stand or you can also use it to jack up here. And put the stand there if you’d. Like.
Where do you put a lift jack under a car?
To raise the vehicle first position the jack under the car chassis at an appropriate lift. Point pump the jack until it comes into contact with the lift point on the frame.
Where do you put the jack under a Ford Fusion?
But it’s a bit too medial to the vehicle. And the trolley Jack I’m using is on the smaller side like I mentioned before you can use the side metal piece here as the jack point as. Well.
