How do you jack up a 2009 Chevy Cobalt?

To jack up a 2009 Chevy Cobalt, you should follow these steps:
Locating the Jack Points
– The video above shows you where the jack location is along with where the jack points and lug nut wrench are located in your Cobalt. Most Chevrolet jack kits include the jack, a jack handle, and a lug nut wrench /jack_up_car/use_your_jack_to_raise_your_car).
– 1A Auto shows you where to safely jack up and secure your Chevy Cobalt or Pontiac G5, model years 05, 06, 07, 08, 09, and 10. Lift the car with a floor jack under the control arm or frame welding furthest back. You can see here in the back. On each side, that’s where you’ll want to lift it. If you’re lifting it with a floor jack, you would lift it here and then put a safety stand further forward. In the rear, you can also jack it up if you wanted to. You can use your floor jack right under this spring carriages here, right under the control arm on either side. Use the jack there and then again put the safety stand underneath here. In the front, again, you’re going to go jack right under the weld.
Safety Precautions
– Jacking up your 2009 Chevrolet Cobalt can be dangerous if done incorrectly. The video shows how to assemble the components of the jack kit and safety precautions to take when using your jack /jack_up_car/use_your_jack_to_raise_your_car).
– The warning to use jack stands is important! Regarding the pinch welds, a block of wood with a slot cut in it or try to find a small rubber pad for your jack at Harbor Freight or the like. There are some solid points on the front and back just a little bit deeper into the car. It should feel more solid and less rusty.
By following these steps and safety precautions, you can safely jack up your 2009 Chevy Cobalt.

Does the 2009 Chevy Cobalt have aux?

2009 Chevrolet Cobalt Overview
The base Cobalt has standard air conditioning, an electric rear defogger, a radio with a CD player, satellite radio and an auxiliary input jack.

How do you jack up a front wheel drive car?

So that when the car leans it doesn’t make contact with anything on the opposite. Side one of the most important things to do is to make sure you jack up the car in the structural.

Where do you put the jack under the front tire?

Typically, there’s a jack point behind either front wheel and in front of either back wheel. This will often be next to the rocker panels (the metal or plastic strips beneath the doors). Sometimes, there are two more central jack points located just behind the front and rear bumpers.

Where do I put the jack to lift my car?

To raise the vehicle first position the jack under the car chassis at an appropriate lift. Point pump the jack until it comes into contact with the lift point on the frame.

How do you jack up a cab?

How to Jack up a Car the Correct Way

1. Park on a stable surface. Never attempt to jack up a car on unstable ground!
2. Chock the wheels.
3. Put the car in “park”
4. Locate the jack point on the vehicle.
5. Place the jack.
6. Raise the jack.
7. Lift the car.
8. Use jack stands or wheel cribs.

What part of the car do you jack up?

Up.

How do I find the jack point on my car?

And the style of jack. And that will keep you out of trouble. On a concrete floor I like to use a good hydraulic jack it makes the job a lot faster.

Where do you put the jack on a front wheel?

Stand. You can now remove the wheel if needed for safety slip it under the vehicle as additional protection.

Is a 2009 Chevy Cobalt a good car?

Pros. If you’re looking for a small car with an upscale interior, a smooth ride and an All-American nameplate, the 2009 Chevrolet Cobalt is a worthy alternative to the Ford Focus. The Cobalt is also easy on gas, a key point of interest for many new car shoppers.

How do you jack up a Chevy Cobalt?

Again you’re going to go jack right under the weld. You can also if you’re looking to just lift up a tire you can Jack right under the subframe. Here. Probably want a jacket.