How do you identify the axle on a Ford F250?

Identifying the Axle on a Ford F250
To identify the axle on a Ford F250, you can use several methods:
1. Door Sticker: The easiest way to identify the axle and gear ratio in your truck is from the door sticker. Open the driver’s door and look at the door jamb. You’ll see a sticker with an area labeled (F) for the Axle Code. The code on the sticker can be used to identify the axle. You can refer to a chart to match the code with the corresponding axle and gear ratio.
2. Measure the Ring Gear: If you are unsure if the axle equipment is original or if you are buying a used truck, you can measure the ring gear behind the differential cover. The Ford F250 built between 1986 and 1997 should have a Sterling 10.25 rear axle. Counting the bolts on the cover can help determine if you have a 10.25 Sterling or a Dana M275 axle .
3. Consult a Ford Expert: If you are still unsure about the axle identification, you can consult a Ford expert or contact the Ford Customer Relationship Center for assistance. They can provide you with accurate information about your specific vehicle.
It’s important to note that axle configurations can vary depending on the year and model of the Ford F250. Therefore, it’s always recommended to use multiple methods to confirm the axle identification.
I hope this helps! Let me know if you have any other questions.

How do I identify my Ford Dana axle?

The Dana Axle Bill of Material Number will tell us what your axle model is, the ratio, and what parts your particular axle was built with. There should be a metal Dana BOM Tag held on by two of the diff cover bolts. There should also be a white Ford assembly decal on the right axle beam.

How do I know what axle my truck has?

This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck. The number can be used to identify the axle, the year of manufacture, and the model vehicle the axle originally came from.

How do I know what axle my F 250 has?

To find the axle code:

1. View the Safety Compliance Certification Label on the driver’s side, front or rear door panel.
2. Find the word “AXLE” under the bar code.
3. Find the two-digit code under “AXLE.”

How do I identify my axle?

Sprung and Torflex axle labels can be found on the side of the axle facing your rear bumper. The axle label provides critical manufacturing information, including the axle serial number, axle capacity, and axle build information. Locating your axle label will help ensure that you identify your axle correctly.

How do I identify a rear axle?

It’s worth noting that rear axles can sometimes be positively identified by a casting number and date stamped on the differential cover or axle tube.

What rear axle does a F 250 have?

The Ford Sterling 10-1/2″ Rear Full-Floating Axle was introduced in 1999 along with the new Super Duty F250 and F350.

How do I identify my Ford rear end?

The ID tag can be your friend. It will tell you the gear ratio, rearend style, and whether it has limited-slip. Also on the tag is an ID number, which, until 1985, included four to five letters, no numbers. Almost all 8.8s—and all post-1986 Ford rearends—have letters and numbers.

How do you identify Ford axles?

FORD AXLE IDENTIFICATION TAGS
The location of Ford identification tags will vary by model, but most are located on a carrier cover bolt. The Ring Gear Size (differential type) and the Gear Ratio will be printed on the tag (as well as whether or not the differential is limited slip).

How do you read a Ford axle tag?

Whether. It needs an additive or not usually that’s on those tags also. As far as identifying Ford. Gives most of the Fords will have the same format. So your super duties your f-150 is your Mustangs.

How do you decode a Ford axle tag?

Whether. It needs an additive or not usually that’s on those tags also. As far as identifying Ford. Gives most of the Fords will have the same format. So your super duties your f-150 is your Mustangs.