How do you identify a Ford rear axle assembly?

Identifying a Ford Rear Axle Assembly
Identifying a Ford rear axle assembly can be done through various methods, including visual identification, locating the identification tag, and using the door sticker. Here are some ways to identify a Ford rear axle assembly:
1. Visual Identification:
– The Ford 9-inch axle has a cast center section and the internal components are installed from the rear. It typically has a stamped steel cover that must be removed to gain access to the internals. The Ford 8.8-inch axle, on the other hand, has a cast center section and the internal components are also installed from the rear. It usually has a stamped steel cover that must be removed to access the internals.
2. Locating the Identification Tag:
– The identification tag on Ford manufactured rear end units is located on the driver’s side of the unit, mounted vertically, facing the front of the vehicle. The top line of the tag is the axle model and may consist of letters only, or a combination of both letters and numbers. This tag must be referenced to a Ford Axle model listing, which gives the year, original application, and differential ring-gear size. Fordification.com has a complete listing of Ford axle models.
3. Using the Door Sticker:
– The easiest way to identify the axle and gear ratio in a Ford truck is from the door sticker. By opening the driver’s door and looking at the door jamb, there will be a sticker with an area labeled (F) for the Axle Code. Once the door code is known, it can be matched with the chart to identify it.
4. Differential Tags and Stampings:
– Differential tags can easily be used to identify Dana and Ford differentials. The most accurate differential identification is provided by the bottom line of the tag number or axle tube stamp. Dana Spicer Differential Tags and Dana Spicer B.O.M. Numbers can also be used for identification.
5. Using the Safety Compliance Certification Label:
– To determine the axle ratio of a vehicle, the two-digit axle code must be located first, then the vehicle’s towing guide can be used to find the axle ratio that corresponds to that code. If the vehicle has a Limited Slip Differential, it will be noted as Limited Slip. The Safety Compliance Certification Label on the driver’s side front or rear door panel can be used to find the two-digit code under AXLE.
In summary, a Ford rear axle assembly can be identified through visual inspection, locating the identification tag, using the door sticker, and referencing differential tags and stampings.
If you need further assistance with identifying a specific Ford rear axle assembly, feel free to provide additional details for a more tailored response.

How do I identify my 8 inch Ford rear end?

Of course, the simplest way to ensure you have an 8-inch rear is to find the ID tag still attached to one of the differential mounting bolts. Axle codes would be a four- or five-digit letter designation for the top row of numbers on the tag.

How do you identify the axle number?

This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck. The number can be used to identify the axle, the year of manufacture, and the model vehicle the axle originally came from.

How do you decode a Ford axle tag?

Whether. It needs an additive or not usually that’s on those tags also. As far as identifying Ford. Gives most of the Fords will have the same format. So your super duties your f-150 is your Mustangs.

How do I find my axle code?

Open the front door on the driver’s side. Locate the Truck Safety Compliance Certification Label on the door pillar near the door latch. Locate the two-digit code in the box labeled “AXLE,” which is just below the bar code.

How do I know what Ford rear axle I have?

To determine the axle ratio of your vehicle, locate the two-digit axle code first, then use your vehicle’s towing guide to find the axle ratio that corresponds to that code. If your vehicle has a limited-slip differential, it will be noted as “Limited Slip.”

How do I identify a rear axle?

It’s worth noting that rear axles can sometimes be positively identified by a casting number and date stamped on the differential cover or axle tube.

How do I identify my Ford 8.8 rear end?

You can identify the Ford 8.8-inch rear by its rear cover. It has a thin metal or plastic 10-bolt cover, and the bolts are 7/16-inch thread. The cover is not quite square, measuring about 101/2 inches high by 11 inches long. The 8.8-inch pinion shaft is 15/8 inches and has 30 splines.

How do I identify my axle?

Sprung and Torflex axle labels can be found on the side of the axle facing your rear bumper. The axle label provides critical manufacturing information, including the axle serial number, axle capacity, and axle build information. Locating your axle label will help ensure that you identify your axle correctly.

How do I identify my Ford axle?

FORD AXLE IDENTIFICATION TAGS
The location of Ford identification tags will vary by model, but most are located on a carrier cover bolt. The Ring Gear Size (differential type) and the Gear Ratio will be printed on the tag (as well as whether or not the differential is limited slip).

How do I find my axle number?

Sprung and Torflex axle labels can be found on the side of the axle facing your rear bumper. The axle label provides critical manufacturing information, including the axle serial number, axle capacity, and axle build information.