Draining Coolant in a Ford C-Max
To drain the coolant in a Ford C-Max, you can follow these steps:
1. Prepare the Vehicle: Ensure that the engine is cool before starting the process.
2. Locate the Coolant Drain Plug: The coolant drain plug is typically located at the bottom of the radiator. It may be a petcock or a simple plug that needs to be removed to drain the coolant.
3. Open the Drain Plug: Once you have located the drain plug, open it to allow the coolant to drain out. It’s important to have a container ready to collect the coolant.
4. Drain the Reservoir: After draining the radiator, it’s also advisable to drain the coolant from the reservoir to ensure a complete coolant replacement.
5. Refill with Coolant: Once the old coolant has been drained, refill the system with the appropriate type of coolant as specified in the owner’s manual. It’s important to mix the coolant with distilled water in the correct ratio, typically 50% coolant and 50% water.
6. Bleed the System: After refilling the coolant, it’s important to bleed the cooling system to remove any air pockets.
It’s worth noting that the process may vary slightly depending on the specific model year of the Ford C-Max. Always refer to the vehicle’s manual for detailed instructions and specifications.
The coolant system is a critical component of the vehicle’s operation, so it’s important to ensure that the draining and refilling process is done correctly to maintain the engine’s optimal performance and prevent overheating.
Contents
- What coolant does a Ford Cmax use?
- What color coolant does Ford use?
- What coolant does Ford recommend?
- Where does the coolant go in a Ford C Max?
- When did Ford stop selling the C-Max?
- Can I flush coolant myself?
- How can I drain my coolant tank?
- Is antifreeze the same as coolant?
- How do I drain my entire coolant system?
- Where is the engine coolant drain plug?
What coolant does a Ford Cmax use?
Technical Specifications
| Item | Capacity | Ford part name or equivalent |
|---|---|---|
| Engine oil 5, 6, 7 | 4.5 quarts (4.3L) | Motorcraft SAE 0W-20 Motor Oil |
| C-MAX engine coolant 8 | 8.2 quarts (7.8L) | Motorcraft Orange Antifreeze / Coolant Prediluted |
| C-MAX Energi engine Coolant8 | 8.8 quarts (8.3L) | |
| Inverter system controller coolant8 | 1.1 quarts (1L) |
What color coolant does Ford use?
Motorcraft® Premium, Gold and Orange Antifreeze/Coolants are now available pre- mixed 50/50 with deionized water.
What coolant does Ford recommend?
Motorcraft® antifreeze/coolants meet specific Ford Motor Company engineering standards. They have been subjected to extensive in-vehicle testing in the applications for which they have been approved.
Where does the coolant go in a Ford C Max?
Checking and Adding Engine Coolant
Open the hood and locate the engine coolant reservoir. It is often a translucent white color, and has hose(s) connecting it to the radiator. The reservoir has a fill range marked on the side. If your engine is cold, the coolant level should be up to the cold fill line.
When did Ford stop selling the C-Max?
The C-Max Hybrid was released in the United States in September 2012 as a 2013 model, followed by the release of the plug-in Energi version by mid-October 2012. Production of the C-Max Energi in the United States ended in September 2017, while Hybrid production ended in 2018.
Can I flush coolant myself?
The good news is that you can keep your engine cool by conducting a coolant flush on your own. Even if you’re not super knowledgeable about cars, it’s easy enough to replace your old coolant with a fresh supply.
How can I drain my coolant tank?
To empty the system, let the engine cool, take the cap off the expansion tank, put the heater control inside the car on ‘hot’, and open the drain tap or remove the bottom hose. Open the bleed screws on the hoses and connections. They are usually thumbscrews and can be opened with the fingers.
Is antifreeze the same as coolant?
Well, antifreeze and engine coolant are similar, but not the same. Antifreeze is a concentrated, glycol-based liquid that must be diluted with water before use – at which point it is referred to as coolant. Alternatively, you can purchase pre-mixed engine coolant, a ready-to-use solution of antifreeze and water.
How do I drain my entire coolant system?
Locate the Drain Plug and Loosen
This is found on the bottom of the radiator. Place a pan under the drain plug to catch old coolant. Loosen the drain plug and allow coolant to flow. Tighten the drain plug when coolant has stopped flowing.
Where is the engine coolant drain plug?
And changing the coolant on. This. Car the first stage in this process is to actually get the coolant. Out in most cars there’s a drain pipe or a tap on the back side of the radiator.
