To use cruise control in a Honda Pilot, you can follow these steps:
1. Make sure your Honda Pilot is in motion and at a speed of at least 25 mph.
2. Locate the cruise control buttons on the steering wheel. These buttons are usually labeled with icons representing cruise control functions.
3. Press the “CRUISE” button to activate the cruise control system. The “CRUISE CONTROL” indicator light should illuminate on the instrument panel.
4. Once the cruise control system is activated, use the “RES/ACCEL” button to set the desired cruising speed. Each press of the button will increase the speed by approximately 1 mph.
5. To decrease the speed, use the “DECEL/SET” button. Each press of the button will decrease the speed by approximately 1 mph.
6. If you need to temporarily deactivate the cruise control system, you can press the “CANCEL” button. This will turn off the cruise control without erasing the set speed.
7. To resume the previously set speed after canceling the cruise control, press the “RES/ACCEL” button.
8. To turn off the cruise control completely, press the “CRUISE” button again or turn off the engine.
Please note that these instructions are general and may vary slightly depending on the specific model year and trim level of your Honda Pilot. It’s always a good idea to consult your vehicle’s owner’s manual for detailed instructions specific to your vehicle.
Contents
- Where is cruise control on Honda?
- What is the cruise control symbol?
- How do I turn on cruise control?
- How do I know if my cruise control is on?
- How do you use cruise on a Honda?
- What does the cruise control icon look like?
- How do I activate cruise control on my Honda?
- Where is the cruise main button located?
- Why is my cruise control not working on my Honda Pilot?
- What is the cruise main light on a Honda Pilot?
Where is cruise control on Honda?
Press the MAIN button on your steering wheel. ACC will appear in the instrument panel, along with LKAS (Lane Keeping Assist). Your cruise speed can be set while driving below 25 MPH or even while the vehicle is stopped with your foot on the brake pedal.
What is the cruise control symbol?
The cruise control system will often be a speedometer symbol with an arrow pointing to a set speed. It will light up green when it has been successfully set, and an amber or yellow light can indicate that cruise control is enabled but not set, or that there is a problem with the system.
How do I turn on cruise control?
To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system.
How do I know if my cruise control is on?
Switch on cruise control: Once you reach your desired speed (making sure it’s within the speed limit), turn on the cruise control system. In most vehicles, the buttons that control it appear on or behind the steering wheel, and a light will appear on your dashboard once it’s turned on.
How do you use cruise on a Honda?
You can control cruise control by pressing the Cruise Control Master Button on the steering wheel. On the instrument panel, a light displays CRUISE MAIN. It is desirable to cruise at a speed greater than 25 miles per hour (40 KPH). DECEL/SET buttons are located on the steering wheel.
What does the cruise control icon look like?
The cruise control system will often be a speedometer symbol with an arrow pointing to a set speed. It will light up green when it has been successfully set, and an amber or yellow light can indicate that cruise control is enabled but not set, or that there is a problem with the system.
How do I activate cruise control on my Honda?
Press the ACC button on the steering wheel. The white ACC icon will become illuminated on your Driver Information Interface (DII). Set your cruise speed by pressing the “RES/+” or SET/-“. If your current speed is below 25mph then it will automatically set to 25mph.
steering wheel
Turning the cruise-control system on — generally via a button on the steering wheel — causes the Cruise Main message to display on the dashboard. This doesn’t mean that you can now take your foot off the accelerator pedal. It means the system has been activated and is ready to have its speed set.
Why is my cruise control not working on my Honda Pilot?
The most common reasons a Honda Pilot cruise control isn’t working are failed control module, sensor or switch issues, or throttle actuation problems.
What is the cruise main light on a Honda Pilot?
The cruise main light tells you that the cruise control system is on after you push the on/off button. However, that does not mean it’s active. You still need to use the controls to set the cruise control speed.
