Cleaning a Subaru Evaporator
To clean a Subaru evaporator, you can follow these general steps:
1. Remove the cabin air filter: It is recommended to remove the cabin air filter before cleaning the evaporator. This will allow better access to the evaporator for cleaning.
2. Access the evaporator coils: Locate the access port to the evaporator coils. This is usually located towards the driver’s side of the evaporator casing. You can use your finger to feel for the coils through the access port.
3. Clean the evaporator coils: There are different methods you can use to clean the evaporator coils. One method involves using a foaming cleanser specifically designed for evaporators. This cleanser is usually included in a cleaning kit that also contains an aerosol cleaner for the intake and venting system. Another method involves using a mixture of water, a small amount of dish soap, and ammonia. You can spray this mixture onto the evaporator coils using a garden pump sprayer.
4. Rinse the evaporator coils: After cleaning the evaporator coils, it is recommended to rinse them with clean water. This helps remove any remaining residue or cleaning solution.
5. Reassemble and test: Once the cleaning process is complete, reassemble the components, including the cabin air filter. Reconnect any disconnected wires or tubes, such as the evaporator drain tube. Finally, test the air conditioning system to ensure it is functioning properly.
Please note that these steps are general guidelines and may vary depending on the specific Subaru model. It is always recommended to consult the vehicle’s owner’s manual for detailed instructions on cleaning the evaporator.
Remember to exercise caution and follow safety guidelines when working with cleaning solutions and automotive components.
I hope this information helps! Let me know if you have any other questions.
Contents
- How much does it cost to clean car AC evaporator?
- Is car AC evaporator cleaning necessary?
- Can you flush a car AC evaporator?
- How do you clean a dirty evaporator coil?
- How do I know if my car evaporator is clogged?
- How do you clean a car evaporator?
- Can a car evaporator get clogged?
- Can I clean my evaporator coil myself?
- How do you diagnose a bad evaporator?
- How do you clean evaporator coils without removing them?
How much does it cost to clean car AC evaporator?
Cost by Type of Coil
Type of Coil | Cleaning Cost Range |
---|---|
Evaporator coil | $100 – $700 |
Condenser coil | $75 – $200 |
Feb 22, 2024
Is car AC evaporator cleaning necessary?
Regular evaporator coil cleaning is a critical aspect of vehicle air conditioner maintenance. So, by keeping the evaporator coil clean and free from dirt and debris, you can ensure optimal cooling performance, improve energy efficiency, and extend the lifespan of your vehicle’s air conditioning system.
Can you flush a car AC evaporator?
If you are operating on a system that has sat idle and without refrigerant for a long period of time (like a project car), the entire system should be flushed before attempting to recharge the system. You will use a flushing tool to blast out the evaporator, condenser, and then clean each AC line.
How do you clean a dirty evaporator coil?
How to clean an AC evaporator coil
- Turn your AC off at the breaker panel. First things first, let’s make sure your AC is off.
- Locate your evaporator coil.
- Take off your coil’s access panel.
- Remove any hair on the coil.
- Clean with coil cleaner.
- Wash with water.
- Reinstall the coil panel and turn your AC back on.
How do I know if my car evaporator is clogged?
Warning signs your evaporator needs replacing
- Weak airflow or warm air: weak airflow could result from a blockage or a blower fan issue.
- Strange/sweet smell: refrigerant has a sweet aroma, and may enter the cabin from a leaking evaporator.
How do you clean a car evaporator?
And then unplugging. This plug-in from the motor. And then that opens up a pretty nice size space to be able to get in there. So let me just show you what I saw sneak in here a little bit.
Can a car evaporator get clogged?
Over time, the AC evaporator core can become clogged with debris, such as leaves, dust, or mold. This can restrict airflow and cause the evaporator to fail. Leaks: Leaks in the refrigerant line can cause the refrigerant to escape and cause the evaporator core to fail.
Can I clean my evaporator coil myself?
Use a can of compressed air (which you can purchase at any hardware store) to gently blow large particles of debris and dirt out of the evaporator coils. Any debris that is stuck can be worked away using your soft bristle brush. Make sure you are not using a metal or wire brush because it can damage the coils.
How do you diagnose a bad evaporator?
Signs of Damaged Evaporator Coil Components
Air coming from the vents is warm. Air conditioner starts and stops frequently but doesn’t properly cool your home. Air conditioner does not turn on. Refrigerant leak near the indoor cooling system components.
How do you clean evaporator coils without removing them?
Use a compressed air canister. One of the best ways to get the dirt and other debris out is to use compressed air. Blow the air into the coil to loosen the dirt. If there’s stubborn dirt, though, you might need to put the nozzle close to the bottom of the debris, along its side.