To check the transmission fluid on a Ford Transit, please follow these steps:
Step 1: Park the vehicle
Park the Ford Transit on a level surface and engage the parking brake.
Step 2: Warm up the engine
Start the engine and allow it to warm up to normal operating temperature. This is important to ensure an accurate reading of the transmission fluid level.
Step 3: Move through the gears
With the engine running, move the gear selector through all of the gears, ending in “Park”. This helps to circulate the transmission fluid.
Step 4: Open the hood
Open the hood of the Ford Transit.
Step 5: Locate the transmission dipstick
Locate the transmission dipstick under the hood. It is usually further back in the engine compartment compared to the engine oil dipstick. Refer to the vehicle’s owner’s manual if you’re having trouble finding it.
Step 6: Check the fluid level
Remove the transmission dipstick and wipe it clean with a lint-free cloth or paper towel. Reinsert the dipstick fully into the reservoir and then remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level range. Ensure that the fluid level is within this range.
If the fluid level is low, you may need to add more transmission fluid. Consult the vehicle’s owner’s manual for the correct type and procedure for adding transmission fluid.
Please note that the Ford Transit does not have a traditional dipstick for checking the transmission fluid level. Instead, it uses a dipstick located under the car on the passenger side of the transmission. To access it, a 19mm or #18 bolt needs to be removed. Removing this bolt will reveal a yellow dipstick that can be used to check the transmission fluid level.
Remember to always consult the vehicle’s owner’s manual for specific instructions and guidelines regarding checking and adding transmission fluid for your Ford Transit model.
Contents
- Does Ford need to be running to check transmission fluid?
- How do I know if I need transmission fluid?
- How often do you change the transmission fluid in a Ford Transit?
- What are signs of low transmission fluid?
- How many quarts of transmission fluid does a Ford Transit take?
- Where do I locate the transmission fluid?
- How do you check transmission fluid on a Ford without dipstick?
- Do you check Ford transmission fluid in park or neutral?
- How do I know when my transmission fluid needs to be changed?
- How can I tell when I need transmission fluid?
Does Ford need to be running to check transmission fluid?
Before proceeding, you will need to turn on your engine for a few minutes in order for the engine to be warmed up enough for a proper level check. Before you exit the car and open the hood, you need to check that the car is in park. You will need to locate the transmission fluid dipstick.
How do I know if I need transmission fluid?
One major sign of low transmission fluid is overheating. If there’s not enough fluid to cool everything down, you may notice a burning smell or see smoke coming from your car. If left alone this can lead to a loss of power or other permanent damage, so seek assistance from a service center right away.
How often do you change the transmission fluid in a Ford Transit?
Ford Transit Van transmission fluid changes are extremely meaningful to keep your vehicle’s transmission amiable and lubricated. If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your Ford Transit Van transmission will slip.
What are signs of low transmission fluid?
Here are the symptoms you can expect to witness when you’re low on transmission fluid.
- Grinding Noises.
- Shaking When Shifting.
- Delays Between Gears.
- Transmission Slipping.
- No Shifting at All.
- Transmission Overheating.
- The Check Engine Light.
- It Smells Like Something Is Burning.
How many quarts of transmission fluid does a Ford Transit take?
For Automatic Transmission: 10R80….ULV
Notes: | (1) The WSS-M2C949-A specification recommended was developed by Ford and GM. Products meeting the specification are available under the DEXRON ULV and MERCON ULV tradenames. |
---|---|
Capacity: | 10 speed 10R80 Total Fill 13 quarts. |
Capacity: | 5.1 quarts Initial Fill. |
Where do I locate the transmission fluid?
But off and not. Running. This Honda’s transmission fluid is right at the proper level but it looks a little bit old and probably time for a change.
How do you check transmission fluid on a Ford without dipstick?
Number one check it on a level surface. Number two check it in park. Number. Three check it while it’s running number four check out an operating temperature to get the most accurate.
Do you check Ford transmission fluid in park or neutral?
Leave car in neutral or park. Let engine warm up and continue to run throughout operation unless vehicle’s owner’s manual says otherwise. (Be aware that some automatic transmission fluid levels are checked with the engine off.
How do I know when my transmission fluid needs to be changed?
Retro Lube Oil Change Blog
- 1) Your Transmission is Slipping.
- 2) Your Transmission is Leaking Fluid.
- 3) Your Transmission Emits an Unusual Odor.
- 4) Your Transmission Causes Rough Idling.
- 5) Your Transmission Shifts Poorly.
- 6) Your Vehicle Accelerates Poorly.
- 7) Your Check Engine or Transmission Warning Light is On.
How can I tell when I need transmission fluid?
In the meantime, it’s a good idea to familiarize yourself with the tell-tale signs that you may be low on transmission fluid.
- Noises.
- Burning Smell.
- Transmission Leaks.
- Slipping Gears.
- Slow Gear Engagement.
- Vehicle Accelerates Poorly.
- Check Engine or Transmission Warning Light Is On.