How do you check the coolant on a Ford Explorer?

Checking Coolant on a Ford Explorer
To check the coolant level on a Ford Explorer, follow these steps:
1. Ensure the Engine is Cool: It’s important to check the coolant level when the engine is cool to avoid the risk of burns.
2. Locate the Coolant Reservoir: The coolant reservoir in your Ford Explorer is where you can check the coolant level. It’s usually a translucent plastic tank located near the radiator.
3. Check the Coolant Level: Look for markings on the side of the reservoir indicating the level when the engine is hot and when it’s cold. Ensure that the coolant level is between the minimum and maximum marks when the engine is cold.
4. Add Coolant if Necessary: If the coolant level is below the minimum mark, you may need to add the appropriate type of coolant. Refer to your owner’s manual to determine the correct type of coolant to add.
Remember, maintaining the proper coolant level is crucial for the engine’s health and performance, especially during the summertime.
If you need further guidance on the type of coolant to use, you can refer to the FCSD Chemicals and Lubricants Quick Reference Charts provided by Ford. These charts can help you identify the recommended engine coolant for your specific Ford model.

Is coolant and antifreeze the same thing?

Key Takeaways:
Coolant is a fluid used in the radiator to remove the engine’s heat. Antifreeze is an additive mixed with water or coolant to prevent your car engine from freezing in cold weather. The ratio of water or coolant to antifreeze should be 50:50.

Can I drive with low coolant?

So, in summation, it is best not to drive your car without coolant. If you discover that you are running low and there is no gas station nearby, then it is recommended that you should call for assistance. Do not continue to drive as you may end up permanently damaging your engine.

Can I just add coolant to my car?

If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water.

Can I check coolant myself?

Open your hood and locate your radiator and coolant reservoir. Some older vehicles don’t include a reservoir, but most modern vehicles have a small tank for filling and checking the coolant level. The reservoir should be clear plastic, so you can easily see the level of coolant and the maximum fill line.

Is it OK to drive with low coolant?

As a result, driving your vehicle with low coolant levels is risky and can cause irreparable damage to your car’s engine, resulting in costly engine repair services.

How do I know if my coolant is low?

So you can see the level. Inside if the coolant level is close to or on the low mark we need to add more coolant to the reservoir. Now before we add coolant to the reservoir.

Is radiator fluid the same as coolant or antifreeze?

And now you know that antifreeze and coolant are basically the same thing and can be generically referred to as radiator fluid. And you also know this fluid is key to keeping your vehicle engine in good working order and helps prevent it from freezing or overheating in any weather. So, bring it on Mother Nature!

Can I add new coolant to old coolant?

Generally speaking, it’s not safe to mix different types of coolant as this can lead to corrosion and other problems with your car’s engine. To make sure your car is running safely, use the same type of coolant for refills or replacements. Click here to read more about why you shouldn’t mix coolant types.

How do you check the coolant level on a Ford Explorer?

Pull that lever to release the safety on the hood there’s a little lever right here you’re gonna push it towards the passenger side lift. Up on the hood. The prop rod is right here lift.

Do you check coolant level with car running?

When checking your coolant level, the first thing you need to know is you shouldn’t check it if the engine is still hot. If your car has been running in a while, your engine, radiator, and reservoir become very hot and, you do not want to touch the reservoir cap or radiator hoses before they’re completely cooled down.