AHG Auto Service » Make » Chevrolet » How do you check coolant levels on a Chevy Sonic?

How do you check coolant levels on a Chevy Sonic?

To check the coolant levels on a Chevy Sonic, you can follow these steps:
1. Park your Chevy Sonic on a level surface to ensure an accurate reading.
2. Allow the engine to cool down before checking the coolant level. The engine should be cool to the touch.
3. Locate the coolant reservoir. In most Chevy Sonic models, the coolant reservoir is located near the radiator.
4. Open the hood of your Chevy Sonic by pulling the hood release lever, usually located under the dashboard.
5. Look for the coolant reservoir cap. It is usually labeled and may have a symbol indicating coolant.
6. Remove the coolant reservoir cap by twisting it counterclockwise. Be cautious as the system may still be pressurized, so remove the cap slowly to release any pressure.
7. Check the coolant level in the reservoir. The coolant level should be between the minimum and maximum marks on the side of the reservoir. If the level is below the minimum mark, you may need to add coolant.
8. If you need to add coolant, refer to your owner’s manual to determine the correct type of coolant to use. The owner’s manual usually provides information on fluid capacities and the type of coolant to use.
9. Add the recommended coolant slowly to the reservoir until the coolant level reaches the maximum mark. Be careful not to overfill the reservoir.
10. Once you have added coolant, securely tighten the coolant reservoir cap by twisting it clockwise.
Remember, it is important to use the coolant type recommended by Chevrolet. In an emergency, you can use any color coolant, but it is recommended to flush and fill the system with the recommended Chevrolet coolant when possible.
I hope this helps! Let me know if you have any other questions.

Does Chevy use special coolant?

Every vehicle manufacturer, including Chevrolet has developed its own coolant or requires a conspicuous coolant that is unique to particular years and models. There are many colors of coolants to help distinguish each including yellow, red, green, blue, purple and orange.

How do you put coolant in a 2012 Chevy Sonic?

The surge tank until it meets the minimum water level and be careful not to overfill the tank. Alternatively. You can buy premix radiator coolant at your dealership.

Is it OK to drive with low coolant?

As a result, driving your vehicle with low coolant levels is risky and can cause irreparable damage to your car’s engine, resulting in costly engine repair services.

Is coolant and antifreeze the same thing?

Key Takeaways:
Coolant is a fluid used in the radiator to remove the engine’s heat. Antifreeze is an additive mixed with water or coolant to prevent your car engine from freezing in cold weather. The ratio of water or coolant to antifreeze should be 50:50.

What coolant does Chevy Sonic use?

Prestone® DEX-COOL® (orange) antifreeze+coolant (AFC) is specially designed to work with All GM® vehicles 1995 & newer; ‘GM approved formula’ (GMC, Chevrolet, Buick, Cadillac, Pontiac, Saturn, Oldsmobile, Hummer), most Ford® vehicles 2011 – 2018 (Ford, Lincoln, Mercury) and most FCA® vehicles 2013 & newer (Ram, Dodge, …

How do I know if my coolant is low?

On the side of the reservoir, it has an L(low) and F(full) markings, and as the tank is translucent, you can see your coolant level without opening the cap. If the fluid is close to or below the L marking then you need to add more coolant to the reservoir.

What color coolant does a Chevy Sonic take?

What color coolant does Chevrolet Sonic use? It’s vital to understand that color doesn’t matter. While most Organic Acid Technology (OAT) coolants are usually orange, yellow, red or purple, Hybrid Organic Acid Technology (HOAT) coolants are orange and yellow.

How do you check coolant level on a Chevy?

And head over the 1a auto calm. With the hood popped you want to make sure the engine is cold. Over here on the passenger side in front of the battery is the coolant reservoir.

Can I check coolant myself?

Open your hood and locate your radiator and coolant reservoir. Some older vehicles don’t include a reservoir, but most modern vehicles have a small tank for filling and checking the coolant level. The reservoir should be clear plastic, so you can easily see the level of coolant and the maximum fill line.

What happens if you drive with very low coolant?

What happens if I drive my car with no coolant? If you ignore these signs and continue to drive your car without coolant, your engine parts will get badly damaged – maybe even permanently – due to overheating. That is why it is very dangerous to drive your car when you are low on coolant.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment