Checking Coolant Additive on a Ford F250
To check the coolant additive on a Ford F250, you can follow these steps:
1. Visit a Certified Ford Service Center: The “Check Coolant Additive” message is a notification that the computer monitors to ensure the coolant is still good. It’s recommended to bring the vehicle to a certified Ford service center for a coolant check. This check typically takes only a few minutes, provided the engine isn’t too hot.
2. Use Test Strips: The coolant additive can be checked using test strips. These test strips are dipped in the coolant to check its pH level and other properties. The coolant additive light comes on every 600 hours to remind you to check the coolant levels. When tested, the coolant is checked for things such as the presence of nitrates, glycol percentage, reserve coolant alkalinity, and the possibility of corrosion.
3. Reset the Alert: If you’ve checked the coolant additive and want to reset the alert, you can navigate to the settings menu, select “vehicle,” then “Maintenance,” and choose “Coolant.” There will be a prompt telling you to hold OK if the coolant additive has been checked. This alert typically pops up every month to remind you to check the coolant levels in your vehicle.
It’s important to note that adding non-recommended coolant, such as Prestone, can contaminate the coolant, and it’s recommended to use Genuine Ford Fluid or Motorcraft VC8 Diesel engine coolant additive for the F250.
Remember, if you’re unsure about the process or have any concerns, it’s always best to consult with a certified Ford service center for the most accurate guidance.
Contents
- How do you reset the coolant additive light on a 2014 f250?
- Why does my f250 says check coolant additive?
- What is the best coolant additive for diesel engines?
- Can you use too much diesel additive?
- What is the coolant additive?
- How much coolant additive for 6.7 Powerstroke?
- Do coolant additives work?
- Is coolant additive the same as antifreeze?
- How do you check the coolant additive on a 2015 f250?
- How long does coolant additive last?
How do you reset the coolant additive light on a 2014 f250?
And under maintenance I’m going to select coolant. And then I’m just gonna hold the okay. Button. Until it resets. And that’s all there is to it so next time I start my car.
Why does my f250 says check coolant additive?
The Check Coolant Additive Light comes on every 600 hours to remind you to check the coolant levels. While this does not indicate a problem, it does mean you should bring your Super Duty in to a certified Ford Service Center for a Coolant Check. DO NOT just add more coolant to the system!
What is the best coolant additive for diesel engines?
VP Racing Cool Down™ coolant additive is proven to reduce your engine temps (by up to 30°F) & cylinder head temps (by up to 75°F) while improving coolant flow. It works for gas and diesel engines & is safe for all radiator systems.
Can you use too much diesel additive?
You can easily add too much of a high-quality diesel fuel additive. What happens when you over-treat your diesel fuel? Overdosing can lead to a whole new list of fuel and engine issues from clogged filters to overall decreased engine performance and efficiency. If you’re losing lubricity, don’t over-treat.
What is the coolant additive?
Coolant additives use chemicals called surfactants. When water is agitated or heated, surface tension holds bubbles together before they burst. Since bubbles are filled with air, they reduce the water’s heat-transfer ability. Imagine thousands of bubbles in the coolant passages of your engine as it runs.
How much coolant additive for 6.7 Powerstroke?
Capacities and Specifications – 6.7L Diesel
| Item | Capacity |
|---|---|
| Engine coolant (secondary cooling system) | 15.1 qt (14.3 L)1 |
| Engine coolant additive (secondary cooling system) | 16.0 fl oz (473 ml)2 |
| Brake fluid | Between MIN and MAX on brake fluid reservoir |
| Front axle | 2.7 qt (2.6 L) |
Do coolant additives work?
Yes, they do help clean the system. Actually, they allow your coolant to work at higher temperatures than water alone before boiling.
Is coolant additive the same as antifreeze?
Coolant is a fluid used in the radiator to remove the engine’s heat. Antifreeze is an additive mixed with water or coolant to prevent your car engine from freezing in cold weather. The ratio of water or coolant to antifreeze should be 50:50.
How do you check the coolant additive on a 2015 f250?
Pull it out. Just like testing a pool just let it sit for a minute. You’re gonna want to read the directions on. The test strips. It looks pretty good okay then we can come up to the bottle.
How long does coolant additive last?
Delivers fast and consistent protection with inorganic chemicals, typically lasts 2 years or 30,000 miles. These additives use an organic acid as the primary corrosion inhibitor and heavily depend on various inorganic supplements such as silicate, nitrate, phosphate, and molybdate.
