AHG Auto Service » Make » Chevrolet » How do you change the rear wiper arm on a Chevy Traverse?

How do you change the rear wiper arm on a Chevy Traverse?

To change the rear wiper arm on a Chevy Traverse, you can follow these steps:
1. Remove the old wiper arm:
– Start by lifting up the cap at the hub of the wiper arm.
– Underneath the cap, you will find a nut. Use a socket and ratchet to remove the nut.
– Once the nut is removed, you can lift the wiper arm off the rear window.
2. Install the new wiper arm:
– Take the new wiper arm and position it in the same location where the old wiper arm was removed.
– Make sure the wiper arm sits horizontally on the window.
– Reinstall the nut and use a socket and ratchet to tighten it down. Be careful not to overtighten and risk damaging the shaft going into the motor.
– Replace the cap at the hub of the wiper arm.
Please note that the specific steps may vary slightly depending on the model year of your Chevy Traverse. It’s always a good idea to consult the vehicle’s manual or refer to instructional videos for your specific model year.
I hope this helps! Let me know if you have any other questions.

How to change the back windshield wiper on a 2015 chevy traverse?

Work it off the glass. Lower this gently so doesn’t smash against your window. There’s the wiper blade. So we’re pushing in on this tab here. Just like that. And it’s unlocking.

How do you fix a rear windshield wiper?

Off you’re going to get this little groove right here you’re going to put on the new. One. Oh sorry you’re going to put it like that snap it in place. And that’s going to be it.

How do you remove a wiper arm cover?

There’s our cap. Set that aside under that cover you’ll find that you have a 15 millimeter nut remove the nut. Let’s install our mounting nut snug it up. Time to install the mounting. Cap.

How much does it cost to replace a rear wiper arm?

Shopping for Wiper Arm
A wiper arm replacement can cost you anywhere between $50 and $250 on parts alone. You’ll most likely spend another $30 to $35 on labor costs.

How do you change the rear wiper on a Chevy Traverse?

So that’s going to fit in the way that you see it. And pull down slowly. And it should click right into place. There now reverse your order put that back on nice and smooth. Open your Port back. Up.

Will AutoZone change my wiper blades for me?

“There’s no purchase necessary, ever,” she told me. Most places, including AutoZone, O’Reilly and Advance Auto Parts will also replace your wiper blades for free if you buy them at their store. Really, if you buy wiper blades, chances are the place you’re buying them from will put them on for you at no cost.

How do you remove rear windshield wipers?

It is a universal blade. So it fits multiple vehicles for Mazda vehicles use the R1 attachment. Take that R1 attachment. And clip it into the old blade. Slide off this yellow thing.

Can you replace a wiper arm?

But if there’s significant rust or corrosion, you’ll need to replace the wiper arm entirely. This is easy to do and makes your vehicle safer to drive!

How do you diagnose a bad wiper arm?

What are Symptoms of Failure?

  1. The wiper blades can “streak” on the windshield due to incorrect positioning of the arm.
  2. Blades can “stutter” as they pass across the windshield.
  3. Blades can lose contact with the windshield altogether.
  4. Blades may fail to move at all.

How do you change the rear wiper blade on a 2018 Chevy Traverse?

We go release. From the blade from the holder. And this is the little tab you’re looking to push. The little plastic tail engineer. If you can see there that little tab is what you push to release.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment