AHG Auto Service » Make » Subaru » How do you change the oil on a Subaru XV?

How do you change the oil on a Subaru XV?

Changing the Oil on a Subaru XV
Changing the oil on a Subaru XV is an essential part of routine maintenance to ensure the vehicle’s optimal performance and longevity. Here’s a step-by-step guide on how to change the oil on a Subaru XV:
1. Determine the Oil Type and Change Interval:
– The Subaru XV requires synthetic oil, specifically 0W-20 synthetic, for optimal performance and engine health.
– The initial oil change should be done after the first 12,500km, and subsequently every 12,500km thereafter.
2. Gather the Necessary Tools and Materials:
– You will need the appropriate amount of synthetic 0W-20 oil, a new oil filter, a wrench, a drain pan, and a funnel.
3. Locate the Oil Drain Plug:
– The oil drain plug is typically located underneath the vehicle. Use a wrench to loosen the drain plug and position the drain pan underneath to catch the old oil.
4. Drain the Old Oil:
– Slowly unscrew the drain plug, allowing the old oil to drain into the pan. Take care not to drop the plug when the oil starts to flow.
5. Replace the Oil Filter:
– After draining the old oil, remove the old oil filter and replace it with a new one. Make sure to lubricate the gasket of the new oil filter with fresh oil before installation.
6. Refill with New Oil:
– Use a funnel to refill the engine with the appropriate amount of synthetic 0W-20 oil, as specified in the owner’s manual.
7. Check the Oil Level:
– After refilling, use the dipstick to check the oil level and ensure it is within the recommended range.
8. Dispose of the Old Oil:
– Properly dispose of the old oil at a designated recycling center or an auto parts store that accepts used oil for recycling.
It’s important to note that while changing the oil at home is relatively straightforward, other maintenance tasks may require professional expertise.
Remember to consult the owner’s manual for specific instructions and safety precautions before performing any maintenance on your vehicle. If you’re unsure about changing the oil yourself, you can always schedule a service appointment with a professional at a Subaru dealership.
I hope this guide helps you with changing the oil on your Subaru XV! If you have any further questions, feel free to ask.

Do Subarus need special oil changes?

No. Subaru Synthetic Motor Oil works with the same Subaru filters used with conventional motor oils.

Why do Subarus use so much oil?

There are 6 key factors that can cause your Subaru to guzzle oil more quickly which are as follows: Wear to the seals or gaskets will result in oil leaks. Poor oil quality will burn up faster than high quality oil. Worn piston rings will allow oil to escape and be burned inside the combustion chamber.

Can you change Subaru oil filter without draining oil?

One common question among car owners is whether they can change their oil filters without changing the oil. The good news is that you can absolutely change your oil filter without emptying the oil from your engine. This is because the location of the oil in your engine remains untouched during a filter change.

Do Subarus require full synthetic oil?

If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.

What brand of oil does Subaru use?

That’s why we created Genuine Subaru 5W-30 and 0W-20 Synthetic Motor Oils – two advanced synthetic formulations that outperform conventional motor oils in several ways: Provides superior protection against oil oxidation and breakdown. Ensures a cleaner running engine and longer engine life.

How do you drain the oil in a Subaru?

All right now that our oil’s finished draining we’re ready to replace our drain bolt. We’re going to put our new drain plug washer on the drain.

What kind of oil does a Subaru XV take?

Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead.

How much oil does a Subaru XV take?

It should be around 5 litres. Check the oil level by examining the dipstick. You may have to add a bit extra to fill it. Start the car and check for potential leaks.

Can you change your own oil on a Subaru?

Unlike other car maintenance tasks, changing your engine oil is something you can do on your own. If you are new to this process, it can take around an hour but subsequently, you should be able to manage in half an hour.

How many miles can a Subaru go without an oil change?

The general rule for Subaru vehicles is to get an oil change every 6,000 miles and every six months, whichever comes first. With that said, don’t go more than six months without getting an oil change, no matter how much or how little you drive.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment