How do you change the oil on a Ford Explorer?

Changing the Oil on a Ford Explorer
Changing the oil on a Ford Explorer involves several steps. Here’s a guide to help you through the process:
1. Oil Type and Grade:
– The recommended oil type for a Ford Explorer is SAE full synthetic 5W-30 or 0W-20. It’s crucial to use the right grade of oil, as using a different grade could damage the engine and void the warranty.
2. Oil Change Instructions:
– Locate the drain plug and oil pan underneath the car to release the oil fluids by unbolting. Lift the vehicle’s front end with at least two jack stands and unbolt the oil pan with a 5/8th socket wrench to drain the oil. The drain plug is found on the driver’s side of the vehicle. After draining the oil, remove the oil filter and replace it. Finally, fill the oil from the top of the engine until full.
3. Tools and Materials Needed:
– To change the oil, you will need a 27mm socket, 7mm socket, ratchet, drain pan, flathead screwdriver, pliers, rags, high-flash point solvent (like brake cleaner, acetone, or paint thinner), funnel, 5W-30 engine oil, and an oil filter.
4. Resetting the Oil Change Light:
– To reset the oil change light on a Ford Explorer, turn the ignition to the ON position but do not start the engine. Then, on the cluster, press the Select button and head to the Set Up Menu. Hold Reset, then hold the Select button for around 3 seconds and let it go. Press the Select button again until you get to Hold Reset If New Oil. Hold the Select button again until you get to Oil Is Set to 100%.
5. Maintenance Schedule:
– Ford recommends changing the engine oil on the Explorer whenever indicated on the oil life monitor and not to exceed 10,000 miles or 12 months. It’s important to maintain the engine oil for optimal performance and longevity.
Remember to consult your owner’s manual for specific instructions and safety precautions before attempting an oil change on your Ford Explorer.

How many quarts of oil does a Ford Explorer take?

6 quarts
Oil Grade: SEOB3

Viscosity:	Above -20 F .5W-20 – To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-20 oil meeting WSS-M2C962-A1.
Capacity:	With filter 6 quarts. After refill check oil level.
Torque:	Oil Drain Plug…19 ft/lbs

Is it worth doing an oil change by myself?

It is best to take your car to a professional mechanic who has the experience and knowledge necessary to perform an oil change safely and effectively. A professional will also be able to identify any problems with your vehicle before they become serious, saving you time and money in the long run.

Is it easy to change your own engine oil?

It’s a simple process that requires few tools, and it’s a sure way to save some money while you avoid the hassle of sitting in a dull waiting room somewhere reading outdated magazines. More than anything, the basic oil change is a great way to connect with your vehicle and take some control over its maintenance.

What kind of oil should I put in a Ford Explorer?

Mobil 1 – Advanced Full Synthetic Motor Oil 5W-30, 1 Quart (Part No. 24812)

Does a Ford Explorer need synthetic oil?

Conventional oil needs to be changed every 3,000 to 5,000 miles, or twice annually. Synthetic oil on the other hand lasts longer and needs to be replaced every 7,000 to 10,000 miles. Ford strongly recommends using full-synthetic oil for your vehicle for optimal performance.

What kind of oil does a Ford Explorer take?

Mobil 1 – Advanced Full Synthetic Motor Oil 5W-30, 1 Quart (Part No. 24812)

Where is the oil change plug?

(See owner’s manual for reference.) Locate oil drain plug, which is a long bolt head at bottom of pan. The drain plug allows the oil to drain out of the pan while you change your oil. (Note: Some vehicles have two drain plugs.)

What kind of oil do you put in a Ford Explorer?

Oil Grade: SEOB4

Viscosity:	Above -20 F .5W-30 – To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-30 oil meeting WSS-M2C963-A1.
Capacity:	With filter 5.2 quarts. After refill check oil level.
Torque:	Oil Drain Plug…20 ft/lbs

How often does a Ford Explorer need an oil change?

every 7,500 miles
A Ford manual will suggest changing the oil every 7,500 miles… However, that is under the most optimal of driving and environmental conditions.

How do I change my engine oil myself?

How to Change Your Oil

1. Step 1: Jack It Up, Open It Up. First, you’ll want to lift the car high enough to give yourself room to work under it.
2. Step 2: Unplug It, Drain It.
3. Step 3: Off With the Old Filter.
4. Step 4: Drain Plug in, Filter On.
5. Step 5: Fill It Back Up with Oil.
6. Step 6: Check the Oil Level, Check for Leaks.