How do you change the oil on a 2017 Chevy Spark?

Changing the Oil on a 2017 Chevy Spark
To change the oil on a 2017 Chevy Spark, you can follow these steps:
1. Gather the necessary tools and materials, including a new oil filter, the appropriate amount and type of oil (SAE 5W-20 synthetic formulated oil), a wrench or socket set, an oil drain pan, and a funnel.
2. Park the vehicle on a level surface and engage the parking brake.
3. Locate the oil drain plug underneath the engine. Place the oil drain pan underneath the plug to catch the old oil.
4. Use a wrench or socket set to loosen and remove the oil drain plug. Allow the old oil to completely drain into the pan.
5. Once the oil has finished draining, replace the oil drain plug and tighten it securely.
6. Locate the oil filter, which is typically located near the oil drain plug. Use an oil filter wrench to loosen and remove the old oil filter. Be careful as some oil may still be inside the filter.
7. Before installing the new oil filter, apply a thin layer of oil to the rubber gasket on the top of the filter. This will help create a proper seal.
8. Install the new oil filter by hand, turning it clockwise until it is snug. Do not overtighten.
9. Locate the oil filler cap on top of the engine. Remove the cap and insert a funnel.
10. Slowly pour the new oil into the engine, using the recommended amount specified in the owner’s manual or by the manufacturer. The 2017 Chevy Spark has an oil capacity of 4.2 quarts with a filter.
11. Once the oil has been added, replace the oil filler cap and ensure it is tightened securely.
12. Start the engine and let it run for a few minutes to circulate the new oil throughout the engine.
13. Turn off the engine and wait a few minutes for the oil to settle.
14. Check the oil level using the dipstick. If necessary, add more oil to bring it to the appropriate level.
15. Finally, reset the oil life indicator. The process for resetting the oil life indicator may vary, so it’s best to consult the owner’s manual or refer to online resources for specific instructions.
Remember to properly dispose of the old oil and oil filter at a designated recycling center or an auto parts store that accepts used oil.
Please note that these instructions are a general guide, and it’s always recommended to consult the owner’s manual or seek professional assistance if you’re unsure or unfamiliar with the process.

How often does a Chevy Spark need an oil change?

every 7,500 – 10,000 miles
How often does a 2022 Chevy Spark need an Oil Change? An oil change is one of the most basic and critical services for your car. Chevy proposes getting your 2022 Chevy Spark oil & filter changed every 3,000-5,000 miles for conventional oil. Synthetic oil normally should be changed every 7,500 – 10,000 miles.

What is the best oil for Chevy Spark?

• Shell ROTELLA T6 15W-40 Full Synthetic Heavy Duty Diesel Engine Oil 2 1/2 Gallon.
• Rotella Synthetic Diesel Synthetic Blend Engine Oil 15W-40 2 1/2 Gallon.
• Rotella Synthetic Diesel Synthetic Blend Engine Oil 10W-30 1 Gallon.
• STP Standard Full Synthetic Engine Oil 0W-20 1 Quart.

How many quarts of oil does a Chevrolet Spark hold?

4.2 quarts
2020 Chevrolet Spark Oil Capacity
The 2020 Chevrolet Spark takes 4.2 quarts of oil.

Does Chevy require synthetic oil?

Many modern Chevy vehicles require synthetic oil to help your engine last longer. You’ll save money over the long term since you have fewer oil changes in Brandon. Synthetic oil also helps you get a better return on your investment, and you can own your vehicle for longer periods of time.

Does a 2017 Chevy Spark use synthetic oil?

Notes: OE Recommendation, Full Synthetic. 5W-20.

How many quarts of oil does a 2017 Chevy Spark take?

4.2 quarts
Capacity: With filter 4.2 quarts. After refill check oil level.

Does Chevy Spark use synthetic oil?

Mobil 1 Full Synthetic Engine Oil 0W-20 5 Quart
Notes: OE Recommendation, Full Synthetic. 0W-20.

What type of oil does a 2017 Chevy Spark use?

The 2017 Chevy Spark with a 1.4l engine uses SAE 5W-20 synthetic formulated oil. It has a capacity of 4.2 quarts with a filter. Oil keeps the internal parts of Your car’s engine cool and lubricated and it also keeps the moving parts from grinding against each other thereby reducing wear and damage.

What size is the oil drain plug on a 2017 Chevy Spark?

Program: oil-tite. Head size (SAE/metric): 15 mm. Thread size: M12-1.75.

What size wrench is the oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.