How do you change the oil on a 2012 Honda Crosstour?

Changing the Oil on a 2012 Honda Crosstour
To change the oil on a 2012 Honda Crosstour, you can follow these steps:
1. Gather the necessary tools and materials, including a wrench or socket, an oil filter wrench, a drain pan, a new oil filter, and the appropriate type and amount of oil for your vehicle.
2. Make sure the engine is cold and the car is parked on a level surface.
3. Locate the oil drain plug, which is located on the base of the engine. Place a drain pan beneath it to catch the old oil.
4. Carefully remove the drain plug using a wrench or socket, allowing the old oil to fully drain into the pan.
5. Once the oil has drained, wipe clean the drain plug area with a paper towel and reinstall the drain plug and washer. Be careful not to over-tighten it.
6. Locate the oil filter, which is typically located near the drain plug. Use an oil filter wrench to remove the old oil filter.
7. Before installing the new oil filter, apply a thin layer of oil to the rubber gasket on the top of the filter.
8. Install the new oil filter by hand, making sure it is tightened securely but not over-tightened.
9. Locate the oil fill cap, which is usually located on the top of the engine. Remove the cap.
10. Slowly pour the appropriate amount of new oil into the engine, using a funnel if necessary. Refer to your owner’s manual or consult a professional to determine the correct oil type and amount for your vehicle.
11. After adding the oil, replace the oil fill cap.
12. Start the engine and let it run for a few minutes, then turn it off and check the oil level using the dipstick. Add more oil if necessary.
That’s it! You have successfully changed the oil on your 2012 Honda Crosstour. Remember to properly dispose of the old oil and filter at a recycling center or an auto parts store that accepts used oil.
Please note that these instructions are a general guide and may vary slightly depending on the specific model and engine of your Honda Crosstour. It’s always a good idea to consult your owner’s manual or seek professional assistance if you are unsure.
I hope this helps! Let me know if you have any other questions.

What size wrench is the oil drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size is the oil drain plug on a 2012 Honda Accord?

Notes: Oil drain plug M14-1.50 single oversize.

What is the best oil for a 2012 Honda Crosstour?

STP Standard Full Synthetic Engine Oil 0W-20 1 Quart
0W-20.

Is synthetic oil better for Honda?

Synthetic Oil
regular oil, it comes down to what your vehicle needs. If you’re driving a used car in the Vista area, then it’s possible that it will be fine with conventional oil. However, new Honda models use Honda Ultimate Full Synthetic motor oil, which is more advanced to accommodate updates in engine technology.

Does Honda recommend synthetic oil?

American Honda recommends using Honda Genuine Motor Oil, sold and available at Honda dealers . If Honda Genuine Motor Oil is not used, conventional motor oil of a premium-grade or an ultimate full synthetic blend may be used and must contain the specified viscosity grade indicated in your Owner’s Manual.

What kind of oil does a Honda Crosstour take?

Mobil 1 – Advanced Full Synthetic Engine Oil 0W-20, 1 Quart (Part No. 44968)

How often do you change the oil in a Honda Crosstour?

Honda Crosstour Maintenance Schedule

Engine Oil	When indicated or every 12-months
Oil filter	With each oil change
Tire rotation	Every 7,500-miles
Air filter	Every 15,000-miles
Coolant	First time after 7,500-miles, then every 15,000-miles

How many quarts of oil does a 2012 Honda Crosstour take?

4.5 quarts
Capacity: 4.5 quarts (with filter). After refill check oil level.

What is the life expectancy of a Honda Crosstour?

200,000-mile
The Honda Crosstour has an estimated 200,000-mile lifespan. If you travel 20,000 miles per year, you can use your Crosstour for ten years before needing major repairs. The Honda Crosstour should endure for more than 200,000 kilometers. A well-maintained Crosstour may go up to 300,000 miles before breaking down.

What size socket do I need to remove an oil plug?

3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.