How do you change the oil in a Subaru?

Changing the Oil in a Subaru
Changing the oil in a Subaru is a relatively straightforward process. Here is a step-by-step guide to changing the oil in a Subaru:
1. Gather the necessary tools and materials:
– Oil filter
– New oil
– Oil filter wrench
– Drain pan
– Funnel
– Socket wrench
– Jack and jack stands (if needed)
2. Prepare the vehicle:
– Park the Subaru on a level surface and engage the parking brake.
– Allow the engine to cool down for a few minutes.
3. Locate the oil drain plug:
– The oil drain plug is typically located on the bottom of the engine oil pan.
4. Drain the old oil:
– Place the drain pan under the oil drain plug.
– Use a socket wrench to loosen and remove the oil drain plug.
– Allow the old oil to completely drain into the pan.
– Once the oil has drained, replace the oil drain plug and tighten it securely.
5. Replace the oil filter:
– Locate the oil filter, which is usually on the side of the engine.
– Use an oil filter wrench to loosen and remove the old oil filter.
– Apply a small amount of new oil to the rubber gasket of the new oil filter.
– Screw the new oil filter onto the engine by hand until it is snug, then tighten it an additional 3/4 turn.
6. Add new oil:
– Locate the oil filler cap on the top of the engine.
– Remove the oil filler cap.
– Insert a funnel into the oil filler hole.
– Slowly pour the new oil into the engine, checking the oil level with the dipstick periodically to avoid overfilling.
– Replace the oil filler cap once the correct amount of oil has been added.
7. Clean up:
– Wipe off any spilled oil from the engine and surrounding areas.
– Dispose of the old oil and filter properly at a recycling center or an auto parts store.
It’s important to note that the specific steps and locations may vary depending on the model and year of the Subaru. It’s always a good idea to consult the owner’s manual for detailed instructions specific to your vehicle.
Remember, if you’re unsure about changing the oil yourself or prefer to have professionals handle it, you can always schedule a service appointment at a Subaru dealership or a trusted service center.
I hope this helps! Let me know if you have any other questions.

How do you drain the oil in a Subaru?

All right now that our oil’s finished draining we’re ready to replace our drain bolt. We’re going to put our new drain plug washer on the drain.

What brand of oil does Subaru use?

That’s why we created Genuine Subaru 5W-30 and 0W-20 Synthetic Motor Oils – two advanced synthetic formulations that outperform conventional motor oils in several ways: Provides superior protection against oil oxidation and breakdown. Ensures a cleaner running engine and longer engine life.

Can I drain my own car oil?

Once vehicle is safely and securely supported, put on safety glasses, crawl under vehicle and locate engine’s oil pan. (See owner’s manual for reference.) Locate oil drain plug, which is a long bolt head at bottom of pan. The drain plug allows the oil to drain out of the pan while you change your oil.

Can I change the oil in my car myself?

You can either ask your local workshop to carry out the oil change for you or do it yourself. If doing it yourself, you should always wear gloves and eye protection if you are working under your vehicle. And make sure only to work when the engine and the oil are cool.

How many miles can a Subaru go without an oil change?

The general rule for Subaru vehicles is to get an oil change every 6,000 miles and every six months, whichever comes first. With that said, don’t go more than six months without getting an oil change, no matter how much or how little you drive.

Can you change your own oil on a Subaru?

Unlike other car maintenance tasks, changing your engine oil is something you can do on your own. If you are new to this process, it can take around an hour but subsequently, you should be able to manage in half an hour.

Can you change Subaru oil filter without draining oil?

One common question among car owners is whether they can change their oil filters without changing the oil. The good news is that you can absolutely change your oil filter without emptying the oil from your engine. This is because the location of the oil in your engine remains untouched during a filter change.

Is it easy to change your own oil?

It’s not difficult to change the engine oil in your own car, but it can be messy and you could hurt yourself if you’re not careful. Find where the engine oil filler cap is. Usually it is somewhere on the top of the motor and will be coloured yellow (user serviceable item). Find what oil your car uses.

Do Subarus need special oil changes?

No. Subaru Synthetic Motor Oil works with the same Subaru filters used with conventional motor oils.

How often does a Subaru need an oil change?

every 5,000 to 7,000 miles
For the most part, your Subaru needs an oil change every 5,000 to 7,000 miles. However, if you tend to travel under more extreme circumstances, you may want to consider having an oil replacement more frequently.