Changing the Oil Filter on a Chevy Trax
To change the oil filter on a Chevy Trax, you can follow these steps:
1. Gather the necessary tools and supplies: You will need a replacement oil filter, a ratchet with a 24mm 6-point socket, and a drain pan to catch the oil.
2. Locate the oil filter access: Raise the hood of your Chevy Trax and locate the filter access behind the coolant reservoir.
3. Unscrew the cap for the oil filter access: Use a ratchet with a 24mm 6-point socket to unscrew the cap and pull the top off.
4. Remove the old oil filter: Take out the old oil filter from the filter housing.
5. Install the new oil filter: Insert the new oil filter into the filter housing, making sure it is properly seated.
6. Replace the cap: Put the cap back on the oil filter access and tighten it securely.
7. Dispose of the old oil filter: Properly dispose of the old oil filter according to local regulations.
8. Refill with fresh oil: After changing the oil filter, you will also need to drain the old oil and refill with fresh oil. Refer to the owner’s manual or a trusted resource for the correct type and amount of oil to use.
Remember, it’s generally recommended to change the oil filter once every 5,000 to 8,000 miles. If you’re unsure about any step or need further guidance, it’s always a good idea to consult the owner’s manual or seek assistance from a professional.
I hope this helps! Let me know if you have any other questions.
Contents
- How many quarts of oil does a Chevy Trax take?
- Do I need a wrench to remove oil filter?
- What tool do you use to change an oil filter?
- Do you need a special tool for oil filter?
- How often does a Chevy Trax need an oil change?
- What kind of oil does Chevy Trax use?
- Can I change oil filter myself?
- What happens if you change an oil filter without changing the oil?
- What kind of oil change does a Chevy Trax need?
- What is the easiest way to change an oil filter?
How many quarts of oil does a Chevy Trax take?
Capacities
| Fuel tank (gal / L): | 14 / 53 |
|---|---|
| Engine oil (qt / L): | 4.75 / 4.5 |
| Cooling system (qt / L): | 6.9 / 6.5 |
Do I need a wrench to remove oil filter?
But it still works and i’ll show. You. So i knocked a hole in it we’re gonna let that drain. Out.
What tool do you use to change an oil filter?
It can be a socket with a ratchet or a combination box end/open end wrench of the correct size. An oil filter cap wrench that fits the size and brand filter you will be using. Sometimes a special wrench is required especially if your vehicle has a cartridge style oil filter.
Do you need a special tool for oil filter?
Removing those filter housings typically requires a special tool. The oil filters screwed into a filter head underneath the engine are supposed to be only hand-tightened, but sometimes removing the spin-on filters will require an oil filter wrench.
How often does a Chevy Trax need an oil change?
every 7,500 – 10,000 miles
How often does a Chevy Trax need an Oil Change? An oil change is one of the most basic and crucial services for your car. Synthetic oil usually should be changed every 7,500 – 10,000 miles. Chevy suggests getting your Chevy Trax oil & filter changed every 3,000-5,000 miles for conventional oil.
What kind of oil does Chevy Trax use?
Mobil 1 – Advanced Full Synthetic Motor Oil 5W-30, 1 Quart (Part No. 24812)
Can I change oil filter myself?
The good news is that you can easily learn to change your own oil filter. It’s one of the easiest car parts to self-service. With DIY Car Service Parts’ simple step-by-step guide, you’ll soon be successfully completing filter changes on your own driveway.
What happens if you change an oil filter without changing the oil?
In most cars, yes. You will normally lose the oil in the filter, and, depending on the location, a little more. In some newer cars, with the cartridge type filter at the top of the engine, the oil will drain down into the engine, and none will be lost. But it will drain with the dirt from the filter.
What kind of oil change does a Chevy Trax need?
Chevy suggests getting your 2022 Chevy Trax oil & filter changed every 3,000-5,000 miles for conventional oil. Synthetic oil usually should be changed every 7,500 – 10,000 miles. Keep in mind it’s best to check your owner’s manual and confer your dealer to find out the intervals that work best for your car.
What is the easiest way to change an oil filter?
Remove oil filter and allow any oil to drain. Away. When the oil has reached a slow drip replace the sump pan plug ensuring you fit a new seal install a new oil filter.
