How do you change a tire on a Dodge Dart?

How to Change a Tire on a Dodge Dart
To change a tire on a Dodge Dart, you will need a spare tire, a car jack, and a tire iron or wrench for loosening the bolts. Here are the steps to follow:
1. Find a safe location: Pull your vehicle to the side of the road and put it in park. Ensure that your car cannot roll forward or backward during the process of changing the tire.
2. Loosen the lug nuts: Use the tire iron or wrench to loosen the lug nuts on the flat tire. Do not remove them completely at this stage.
3. Position the jack: Place the jack underneath your vehicle at the designated spot. Refer to your vehicle’s manual for the exact location.
4. Lift the vehicle: Use the jack to lift the vehicle until the flat tire is off the ground. Make sure the vehicle is stable and secure before proceeding.
5. Remove the lug nuts and flat tire: Fully remove the lug nuts and take off the flat tire. Place the lug nuts in a safe location to avoid losing them.
6. Install the spare tire: Place the spare tire onto the wheel hub and hand-tighten the lug nuts.
7. Lower the vehicle: Use the jack to lower the vehicle until the spare tire touches the ground, but is not fully supporting the weight of the vehicle.
8. Tighten the lug nuts: Use the tire iron or wrench to tighten the lug nuts in a star pattern. This ensures even tightening and prevents the tire from becoming misaligned.
9. Lower the vehicle completely: Use the jack to lower the vehicle until it is fully supported by the spare tire.
10. Tighten the lug nuts again: Double-check the tightness of the lug nuts to ensure they are secure.
11. Collect your tools and drive carefully: Gather all your tools and make sure everything is secure. Drive cautiously and listen for any unusual sounds from the tire to ensure everything is working properly.
Remember, these steps are a general guide, and it’s always a good idea to consult your vehicle’s manual for specific instructions related to your Dodge Dart model.
I hope this helps! Let me know if you have any other questions.

How do you change a tire step by step?

Below, I’ve broken down how to change a tire in 10 simple steps.

1. Find a Safe Place to Pull Over.
2. Check for Materials.
3. Loosen the Lug Nuts.
4. Lift Your Vehicle Off the Ground.
5. Remove the Lug Nuts and the Tire.
6. Place the Spare Tire on the Car.
7. Replace the Lug Nuts.
8. Lower Your Vehicle and Begin Tightening.

How do you take a tire off a car?

And keep all body parts out from underneath the car while it’s jacked up finish loosening the lugs. And keep them in a safe place pull the flat tire off and replace it with your spare.

Which way do you turn to remove a tire?

to complete this task, place your car in park (or in gear should your vehicle be equipped with a manual transmission), and using a lug wrench, loosen the lug nuts that are holding the wheel in place. To loosen the lug nuts, turn them in a counter-clockwise direction. Remember, righty tighty, lefty loosey.

How do you jack up a 2015 Dodge Dart?

Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw clockwise to firmly engage the jack settled with the lift area.

Where do you put a wheel jack?

The jacking points for most vehicles are reinforced metal ribs specifically designed to safely lift the vehicle. On most vehicles, there are four jacking points. They’re located under the car’s rocker panels, just behind the front wheels and just ahead of the rear wheels.

How do you jack up a car to change a tire?

Gary is going to place it under there’s a little spot underneath the vehicle. Some people call it a frame rail. Sometimes you’ll see arrows. Sometimes you’ll say it’ll say raised here.

How do you jack up a 2013 Dodge Dart?

The compact spare tire jack. And jack handle are stowed under the rear load floor in the trunk. Lift up the load floor cover and remove the hold down.

Is it easy to replace a tire by yourself?

It’s easier than you think. Changing your own tires is a job you can handle yourself if you already have rims attached to your tires. Anyone can do it, it just takes knowledge, practice and confidence to build the skill.

Is it easy to change car tire?

Changing a tire is actually rather physically demanding. You have to put some muscle in getting the lug nuts off and cranking the jack, and then you have to bend down and lift the tire. Often, folks will try to do all of this is a hurry to get on their way, but that’s a mistake.

Can you change a tire by yourself?

With the right tools, it is absolutely safe and okay to change your tires. When you change your own tires, you know exactly what has been done to the car, and there is no question of whether the work was done correctly. You also save the money you would have spent on labor at a mechanic’s shop.