How do you change a tag light on a 2014 Toyota Corolla?

Steps to Change the License Plate Light on a 2014 Toyota Corolla
To change the license plate light on a 2014 Toyota Corolla, you can follow these steps:
1. Check the fuse: Before replacing the license plate light bulb, it’s a good idea to check the fuse to ensure it’s not the cause of the issue. Refer to your vehicle’s manual for the location of the fuse box and the specific fuse for the license plate light.
2. Access the trunk: Open the trunk of your Toyota Corolla and locate the trim panel on the inside of the trunk lid.
3. Remove the trim panel: Carefully remove the trim panel by unscrewing any screws or clips that are holding it in place. Be cautious of any sharp edges that may be present.
4. Locate the license plate light bulb: Once the trim panel is removed, you should be able to see the license plate light bulb socket. It is usually located near the license plate itself.
5. Remove the old bulb: Twist the license plate light bulb socket counterclockwise to remove it from the housing. Gently pull out the old bulb from the socket.
6. Insert the new bulb: Take the new license plate light bulb and insert it into the socket. Make sure it is securely in place.
7. Reinstall the bulb socket: Twist the license plate light bulb socket clockwise to secure it back into the housing.
8. Replace the trim panel: Carefully reinstall the trim panel by aligning it properly and securing any screws or clips that were removed earlier.
9. Test the new bulb: Close the trunk and turn on your vehicle’s lights to test the new license plate light bulb. Ensure that it is functioning properly.
If you prefer, you can also watch a video tutorial on how to replace the license plate light bulb on a 2014 Toyota Corolla on platforms like YouTube.
Remember, if you’re not comfortable performing this task yourself, you can always have a mechanic replace the license plate light bulb for you. The cost for professional repairs is typically around $60.
I hope this helps! Let me know if you have any other questions.

Will AutoZone change my turn signal bulb?

Sure, as long as you purchase the bulb from us and we assess the difficulty. If it’s too difficult we will not be able to change it. Although some sales reps are confident enough to try. Just ask us to have a look and we’ll see what we can do!

How do you replace LED plate lights?

Install LED License Plate Light

1. Take a flat head screwdriver and remove the license plate housing cover.
2. Remove the bulb housing.
3. Remove the stock license plate bulb.
4. Directly replace with the new LED license plate bulb.
5. Put everything back the same way it was removed.

How do you change a light globe on a car?

You’ll want to detach the wire socket from the bulb. Just press the tab to release it. And pull on the socket. Be careful to pull on the socket. And not the wires.

Can I change my own tag light?

Replacing your car’s tail light bulbs is a simple and straightforward procedure. The rear light bulbs are usually housed in a single unit that’s easy to access from inside the boot. Haynes has full step-by-step information on how to do this. Most tail light bulbs are filled with halogen gas, and are readily available.

How do you change a license plate light bulb on a Toyota?

And you twist it counterclockwise. And it comes out and then after you get it out. You pull the bulb out. And then you replace the bulb now I ended up getting LED bulbs.

How do you change a license plate light on a 2012 Toyota Camry?

And you pull out on this light bulb here well that light bulb is a 168.. So we’ll get a new one. So we’ve got our new 168 light bulb. And then this just presses in there align it so the flat.

What color tag light?

Most states allow white license plate lights only. Using other colors or styles, especially red lights, blue lights, or flashing lights, is unlawful. To stay in line with the law, stick with white lights. It is also recommended to use LED bulbs, as these have the best longevity, energy efficiency, and brightness.

What is the tag light called?

Tag lights, also known as license plate lights, allow other vehicles to see your license plate in the dark. If the tag lights on your vehicle go out, you need to replace them as soon as you can or else you may get pulled over.

How do you remove a tag light?

Then just turned the light housing counterclockwise to release it. Then you’re able to pull out your old bulb. And install your new bulb. Then you can reinstall your lighthousing.

What can I use for a tag light?

You can either get LED or incandescent bulbs to use for your tag lights. Choose white light bulbs so they illuminate your license plate without causing any distractions while you’re on the road. Tag lights only cost about $2-3 USD. You may also check your vehicle’s user manual to find what kind of tag lights you need.