How do you change a license plate light on a 2015 Chevy Equinox?

How to Change a License Plate Light on a 2015 Chevy Equinox
To change the license plate light on a 2015 Chevy Equinox, you can follow these steps:
1. Open the rear hatch of the Equinox to access the license plate area.
2. Locate the plastic cover that protects the license plate light bulbs.
3. Remove the plastic cover by sliding it to the left side of the vehicle until it unlocks.
4. Once the cover is removed, you will have access to the license plate light bulbs.
5. Carefully remove the old license plate light bulb by twisting it counterclockwise and pulling it out.
6. Insert a new license plate light bulb into the socket and twist it clockwise to secure it in place.
7. Replace the plastic cover by sliding it back into the mounting area over the license plate, starting with the right side. Slide the cover toward the left side until it locks.
Please note that the specific steps may vary slightly depending on the exact model and trim level of your 2015 Chevy Equinox. It’s always a good idea to consult the vehicle’s owner’s manual for detailed instructions and diagrams specific to your vehicle.
I hope this helps! Let me know if you have any other questions.

How do you change a license plate light on a 2014 Chevy Equinox?

And test it. Line up the tabs on the socket with the slots in the housing. Install the socket. And turn it clockwise Slide the inside of the assembly in first then push it up into place.

How much does it cost to replace a headlight on a Chevy Equinox?

The average cost for a Chevrolet Equinox Headlight Bulb Replacement is between $173 and $202. Labor costs are estimated between $48 and $60 while parts are priced between $126 and $142. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

How do you change a license plate light on a Chevy Equinox?

It. And now to get the bulb out you just have to turn this light socket counterclockwise. And uh pull out. And that’s it to replace the bulb itself there is no twisting you just pull it straight out.

How to remove a license plate light bulb?

Unscrew the licence plate and the bracket to access the light easier. Lever out the licence plate lamp with a screwdriver. In most cases there is a notch next to the lamp for exactly this purpose; in some cases the lamp does not have to be levered out but unscrewed instead. Then disconnect the power connector.

How do you change a number plate light bulb?

Put it here in this latch. And just pull it out you don’t have to unscrew. Anything this is the way to pull it out and replace the bulb. After that once you replaced. It just push it back into place.

How do you change the license plate light on a 2018 Equinox?

So i’ll go ahead and take a look at this one and you just get under the edge of it and it’ll just come right out like that it comes out pretty. Easy. So then once you have it. Out.

How do you change a lightbulb in a 2013 Chevy Equinox?

And then the headlight should be right behind. There and there’s the light right in. There. Just twist that to the left about 45 degrees it should pop right. Out.

How do you change a license plate light on a 2012 Chevy Equinox?

And test it. Line up the tabs on the socket with the slots in the housing. Install the socket. And turn it clockwise Slide the inside of the assembly in first then push it up into place.

How do I change my tag light?

Then just turned the light housing counterclockwise to release it. Then you’re able to pull out your old bulb. And install your new bulb. Then you can reinstall your lighthousing.

How do you change a license plate light on a 2016 Chevy Equinox?

And test it. Line up the tabs on the socket with the slots in the housing. Install the socket. And turn it clockwise Slide the inside of the assembly in first then push it up into place.