How do you change a license plate bulb on a Subaru?

How to Change a License Plate Bulb on a Subaru
To change a license plate bulb on a Subaru, you can follow these general steps:
1. Insert a finger into the right side of the license plate light cover and press once to the left. Pull out the cover to remove it.
2. Turn the bulb socket counterclockwise and pull out the socket.
3. Replace the old bulb with a new one.
4. Insert the socket back into the housing and turn it clockwise to secure it.
5. Place the license plate light cover back in position and press it to secure it.
Please note that the specific process may vary slightly depending on the Subaru model and year. It’s always a good idea to consult the owner’s manual for your specific vehicle for detailed instructions.
Here are some relevant snippets from the search results:
– According to the Subaru Impreza Owners Manual, to replace the license plate light bulb on a Subaru Impreza, you need to insert a finger into the right side of the license plate light cover, press once to the left, and pull out the cover. Then, turn the bulb socket counterclockwise and pull out the socket.
– A user on a Subaru WRX forum mentioned that to change the license plate bulb, you need to twist the housing and the bulb holder will come out. It’s a simple process that takes about a minute per light.
– Another user on a Subaru Outback forum shared their experience of changing the license plate bulb. They mentioned that the license plate unit is one piece, and you need to push really hard on the right side of the unit towards the left to remove it.
Remember to consult the owner’s manual for your specific Subaru model for the most accurate instructions.

Contents

How do you put a front license plate on a Subaru Impreza?
How do you change a license plate light on a Subaru?
Can I change my own tag light?
How do you get a light bulb out of a license plate?
How do you remove a light bulb shell?
How do you change a LED license plate light?
How do you change LED bulbs?
What does license plate light out mean?
How do you change a license plate light on a 2014 Subaru Crosstrek?
How do you change a license plate light on a 2016 Subaru Impreza?

How do you put a front license plate on a Subaru Impreza?

And they’re about the size of a pinpoint. So there’s one here. And one right there that is where you’re going to screw. Your screws in to mount your license plate. So it’s very easy to do i suggest.

How do you change a license plate light on a Subaru?

And then out. So slide it in there. And then use a screwdriver to pry the light out. See that I’m going to do it again with my thumb. So you can see it. So slide it in and out in and out.

Can I change my own tag light?

Replacing your car’s tail light bulbs is a simple and straightforward procedure. The rear light bulbs are usually housed in a single unit that’s easy to access from inside the boot. Haynes has full step-by-step information on how to do this. Most tail light bulbs are filled with halogen gas, and are readily available.

How do you get a light bulb out of a license plate?

Then just turned the light housing counterclockwise to release it. Then you’re able to pull out your old bulb. And install your new bulb. Then you can reinstall your lighthousing.

How do you remove a light bulb shell?

You could take a pair of needle nose pliers. And you can put them in and twist. And turn until that ball base. Comes right out of the socket.

How do you change a LED license plate light?

Unscrew the licence plate and the bracket to access the light easier. Lever out the licence plate lamp with a screwdriver. In most cases there is a notch next to the lamp for exactly this purpose; in some cases the lamp does not have to be levered out but unscrewed instead. Then disconnect the power connector.

How do you change LED bulbs?

And then they will work great in that application. It’s a great simple. Project no electric work needed it goes right up in that can it makes a nice finished look and it really sets off your ceiling.

What does license plate light out mean?

Author has 608 answers and 2.3M answer views. 1y. Most cars have only one license plate light. So if it’s out, that would mean you have no license plate light. And that is something you can get pulled over for.