How do you change a license plate bulb on a Ford Fusion?

To change the license plate bulb on a Ford Fusion, you can follow these steps:
Steps to Change the License Plate Bulb:
1. Access the Bulb: Depending on the year of your Ford Fusion, you may need to access the bulb from the outside or inside of the trunk lid.
– For newer models, you can access the bulb from the outside of the trunk lid.
– For older models, you may need to access the bulb from inside the trunk.
2. Remove the Bulb: Once you have access to the bulb, you can remove it by twisting it counterclockwise to unlock it from the socket.
3. Replace with a New Bulb: After removing the old bulb, replace it with a new one. Ensure that the new bulb is compatible with your Ford Fusion’s model year.
4. Test the Bulb: After replacing the bulb, test it to make sure it’s functioning properly.
5. Reassemble: If you accessed the bulb from inside the trunk, reassemble any panels or covers that were removed to access the bulb.
Additional Information:
– If you need to purchase a replacement bulb, you can find compatible license plate light bulbs for your Ford Fusion from trusted brands like Sylvania and Autopart International Inc at various auto parts stores.
– You can also consider LED license plate light options for your Ford Fusion, which can provide a bright and long-lasting lighting solution.
By following these steps, you should be able to change the license plate bulb on your Ford Fusion.

How do you change a license plate light on a 2014 Ford Fusion?

And turn it clockwise to secure. It. When you’re ready to reinsert the license plate bulb housing. Make sure that you insert these two tabs on the left side first. And then it’ll just snap into place.

How do you change a number plate bulb on a Ford Focus?

Look oh well so now we need to pry the light down away from the car using the flat head screwdriver. In there should come down fairly easily which indeed. It has. And there we go we can see the bulb.

Where is the color code on a 2014 Ford Fusion?

Find your vehicle’s paint code located on your vehicle’s doorjamb label. The exterior paint code will be labeled as EXT PNT followed by two characters.

How do you get a light bulb out of a license plate?

Then just turned the light housing counterclockwise to release it. Then you’re able to pull out your old bulb. And install your new bulb. Then you can reinstall your lighthousing.

How do you install license plate lights?

Then you’ll pop your OEM bulb out. And slide the connection for your new housings. Into the slot. Do this to both sides reinstall. Your trunk trim and voila.

How do you remove a light bulb shell?

Alright right there Andrews pointing with these got a little flat. Mast screwdriver and there’s just a little thing you push down with that screwdriver then you twist. So you just push it down.

How do you change a number plate light bulb?

Put it here in this latch. And just pull it out you don’t have to unscrew. Anything this is the way to pull it out and replace the bulb. After that once you replaced. It just push it back into place.

How do you change a LED license plate light?

Install LED License Plate Light

1. Take a flat head screwdriver and remove the license plate housing cover.
2. Remove the bulb housing.
3. Remove the stock license plate bulb.
4. Directly replace with the new LED license plate bulb.
5. Put everything back the same way it was removed.

How do you separate a light bulb from its base?

You could take a pair of needle nose pliers. And you can put them in and twist. And turn until that ball base. Comes right out of the socket.

How do you remove a license plate lamp?

Unscrew the licence plate and the bracket to access the light easier. Lever out the licence plate lamp with a screwdriver. In most cases there is a notch next to the lamp for exactly this purpose; in some cases the lamp does not have to be levered out but unscrewed instead. Then disconnect the power connector.