How do you change a headlight on a 2018 Dodge Challenger?

How to Change a Headlight on a 2018 Dodge Challenger
To change a headlight on a 2018 Dodge Challenger, you can follow these steps:
1. Open the Hood: Pull the hood release lever located on the driver’s side of the dash, just above the parking brake pedal.
2. Locate the Headlight Housing: Once the hood is open, locate the headlight housing that needs to be replaced.
3. Remove the Bulb: Depending on the model year of your Challenger, the type of bulb used may vary. For 2009-2014 Challengers, the bulb type is H13/9008 Halogen Headlight Bulb, while for 2015+ Challengers, the bulb type is 9012 HIR2 Halogen Headlight Bulb. Carefully disconnect the wiring harness from the back of the bulb and remove the bulb from the housing.
4. Install the New Bulb: Take the new bulb and insert it into the headlight housing. Make sure it is securely in place.
5. Reconnect the Wiring Harness: Reconnect the wiring harness to the back of the new bulb.
6. Test the Headlight: Before closing the hood, turn on the headlights to ensure that the new bulb is working properly.
7. Close the Hood: Once you have confirmed that the new bulb is functioning correctly, close the hood of your Dodge Challenger.
Please note that these instructions are for replacing the halogen headlight bulbs on a Dodge Challenger. If your Challenger is equipped with HID headlights, the process may be different.
I hope this helps! Let me know if you have any other questions.

Can you change headlights by yourself?

You’ll want to detach the wire socket from the bulb. Just press the tab to release it. And pull on the socket. Be careful to pull on the socket. And not the wires.

How much should it cost to replace a headlight?

When you factor in the cost of the bulb and the labor, you will be looking at a total cost of between $30 and $300, depending on the type of bulb and the difficulty of installation. If you need to replace the entire headlight assembly, the price variation is extreme, to say the least.

Does AutoZone replace headlights?

Between night driving, inclement weather driving and driving on twisted mountain roads, there’s no doubt you need the brightest headlights to get you where you’re going safely. Luckily, if both or even just one headlight bulb seems to be dying, AutoZone has the quick-fix to get you back on the road quickly.

Will I get pulled over if one of my headlights are out?

Driving with one headlight out isn’t permitted in any state. Some states consider driving with only one headlight a correctable violation, so their law enforcers give fix-it tickets.

How do you replace a front headlight?

Here’s how it’s done:

1. Turn off your car. The last thing you want is to touch a live wire, so shut off your engine and take your keys out of the ignition.
2. Pop your hood. Open your hood to look for the headlight housing.
3. Disconnect the headlight wires.
4. Remove the old headlight.
5. Install the new bulb.

Which headlight is the main headlight?

Low beam − These are the main headlights designed to illuminate the road directly in front of the car. They shine brightly, but only for a short distance (about 40-50 meters). High beam − The headlights that shine at a long distance, 656-984 feet.

How do you remove a headlight assembly?

You get your supplies together here’s what you’ll do locate. The two bolts on the top of the assembly and remove them with your wrench or socket. Set them someplace. Safe.

How many headlights does a Dodge Challenger have?

These units have H13/9008 bulbs, two to each housing making for a total of four individual lights across the front of the car.

How do you remove a headlight bulb from a Dodge Challenger?

Rotate the bulb holder. And pull it out of the housing. Using a small screwdriver to release the tab disconnect the electrical connector and remove the headlight. Bulb.

Does O Reilly change headlight bulbs for free?

We also offer FREE bulb installation*. *Our parts professionals can install most vehicle light bulbs, however, some vehicles are exempt from this service due to hard-to-access bulbs or lighting assemblies that require extensive disassembly.