AHG Auto Service » Make » Chevrolet » How do you change a headlight on a 2016 Chevy Sonic?

How do you change a headlight on a 2016 Chevy Sonic?

How to Change a Headlight on a 2016 Chevy Sonic
To change a headlight on a 2016 Chevy Sonic, you can follow these steps:
1. Gather the necessary tools: You won’t need any special tools to change the headlight on a Chevy Sonic. However, it’s always a good idea to have a pair of gloves and a clean cloth on hand to avoid touching the bulb with your bare hands.
2. Access the headlight assembly: Open the hood of your Chevy Sonic and locate the back of the headlight assembly. You may need to remove any covers or panels that are obstructing access to the headlight bulb.
3. Disconnect the electrical connector: Carefully disconnect the electrical connector from the back of the headlight bulb. This connector may have a locking tab that needs to be pressed or a twist-lock mechanism that needs to be rotated before it can be removed.
4. Remove the old headlight bulb: Once the electrical connector is disconnected, you can remove the old headlight bulb. Depending on the specific model of your Chevy Sonic, the bulb may be held in place by a retaining clip or a twist-lock ring. Follow the instructions in your vehicle’s manual or refer to online resources for detailed instructions on how to remove the bulb.
5. Install the new headlight bulb: Take the new headlight bulb and carefully insert it into the headlight assembly. Make sure it is properly aligned and seated securely. If there is a retaining clip or twist-lock ring, use it to secure the bulb in place.
6. Reconnect the electrical connector: Once the new bulb is installed, reconnect the electrical connector to the back of the bulb. Ensure that it is securely connected and locked in place.
7. Test the new headlight bulb: Before closing the hood, turn on the headlights to make sure the new bulb is working properly. If the bulb does not light up, double-check the connection and make sure the bulb is properly seated.
8. Replace any covers or panels: If you had to remove any covers or panels to access the headlight assembly, make sure to replace them securely.
Please note that these instructions are a general guide and may vary slightly depending on the specific model and trim level of your Chevy Sonic. It’s always a good idea to consult your vehicle’s manual or refer to online resources for detailed instructions and diagrams specific to your vehicle.
I hope this helps! Let me know if you have any other questions.

How do you replace headlight housing?

Locate the headlight housing and unplug the wires for the blinker and headlight. Disconnect any electrical connection from the back of the headlight housing. Use a screwdriver to loosen the bracket on the headlight housing and remove it. Put in the new housing and secure it into place.

Will AutoZone change my headlight for me?

AutoZone is a retail store without a trained mechanic, so don’t expect them to install your headlight if they refuse. In addition, AutoZone may not be able to replace your headlight if doing so would require disassembling any part of your vehicle.

How do you change an aftermarket headlight bulb?

How to Safely Change a Headlight

  1. Find gloves to wear.
  2. Determine which headlight bulb you need.
  3. Turn off your vehicle.
  4. Pop the hood and locate the headlight holder.
  5. Disconnect the power wires Usually, there will be three of them to disconnect.
  6. Remove the old bulb.
  7. Replace with a new bulb.
  8. Test the bulb.

Does O Reilly change headlight bulbs for free?

O’Reilly Auto Parts’ FREE Store Services
Along with free bulb installation, O’Reilly Auto Parts also provides several other free store services, including free windshield wiper installation, free Check Engine light testing, free alternator and starter testing, free battery testing, and free fluid and battery recycling.

Is it easy to replace headlight housing?

On some models of car replacing the headlight assembly is very straight forward and can be done in your driveway in a matter of minutes. However, many automobiles require that you would have to go to the extreme of entirely removing the front bumper or other components of your vehicle to be able to do so.

How do you change a headlight by yourself?

5 Steps To Change Your Headlight Bulb

  1. Turn off your car. The last thing you want is to touch a live wire, so shut off your engine and take your keys out of the ignition.
  2. Pop your hood. Open your hood to look for the headlight housing.
  3. Disconnect the headlight wires.
  4. Remove the old headlight.
  5. Install the new bulb.

Will AutoZone change my headlight bulb?

Luckily, if both or even just one headlight bulb seems to be dying, AutoZone has the quick-fix to get you back on the road quickly.

How do you change a headlight on a Chevy?

Just like that. And then you can slide them. Up. Do the same on this one pop. It out. Slide it up grab the headlight assembly. And it just slides right out.

Will AutoZone change out my headlights?

Luckily, if both or even just one headlight bulb seems to be dying, AutoZone has the quick-fix to get you back on the road quickly.

How much does it cost to have someone change your headlight bulb?

When you factor in the cost of the bulb and the labor, you will be looking at a total cost of between $30 and $300, depending on the type of bulb and the difficulty of installation. If you need to replace the entire headlight assembly, the price variation is extreme, to say the least.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment