How to Calibrate the TPMS on a Honda Civic
To calibrate the Tire Pressure Monitoring System (TPMS) on a Honda Civic, you can follow these steps:
1. For Models with Touchscreen Display:
– From the Home screen, select Settings.
– Select vehicle.
– Select TPMS Calibration.
– Select Calibrate.
2. For Models with TPMS Button:
– Turn the car to the ON position.
– Press and hold the TPMS switch on the dash to the left of the steering wheel for 3 seconds.
– When the calibration successfully begins, the TPMS light on the dash blinks twice.
– Drive the car 26 MPH or faster in a straight line and verify the light goes out.
3. For Models without TPMS Button:
– Inflate your tires to the specified PSI on the driver’s side door jamb.
– The low pressure light will turn off on its own after driving. If the low pressure light is still on after driving and/or there is a TPMS warning on the i-MID (screen on the dashboard), then there may be an issue that requires professional attention.
4. For Certain Years/Models:
– Certain years/models do not have the calibrate option in customized settings. Calibration is supposed to be automatic, provided all 4 tires are properly inflated, and you didn’t replace any of the TPMS sensors. If you replaced any of the TPMS sensors, then they have to be recalibrated via a computer connected to OBDII port.
5. Additional Tips:
– It’s recommended to recalibrate the TPMS after a tire is refilled or replaced, or the tires are rotated.
– The TPMS needs to be recalibrated before it will work properly again. Once you start the recalibration process, it takes about 30 minutes of driving between 30-65 miles per hour.
Remember to always refer to the specific instructions for your Honda Civic model and year, as the process may vary depending on the vehicle’s technology and features.
Contents
- Where is the TPMS reset button located?
- Does Honda TPMS reset automatically?
- How do I program my Honda TPMS?
- How do you relearn the TPMS on a Honda?
- How long does TPMS calibration take Honda Civic?
- Can I reset my TPMS myself?
- How do you recalibrate TPMS on a Honda Civic?
- How do I calibrate my TPMS?
- Where is TPMS located on Honda Civic?
- How do you reprogram a Honda TPMS sensor?
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Does Honda TPMS reset automatically?
After you’ve had the chance to fill up your tires to the proper level, here’s how to reset the tire pressure light in your Honda CR-V below in a few simple steps: Drive at or above 50 mph to reset the sensor for 10 minutes. This can cause your sensor to reset the next time you turn on the car.
How do I program my Honda TPMS?
Models with steering wheel buttons:
- Press MENU.
- Select Customize Settings.
- Select TPMS Calibration.
- Select Initialize.
- Select Yes.
- Press MENU to exit.
How do you relearn the TPMS on a Honda?
With the steering wheel’s buttons, scroll to “Driver Information” and select “Vehicle Settings.” Within this sub-menu, select “TPMS Calibration” and choose “Calibrate.” Finally, Honda suggests driving for up to 30 minutes to gauge if the calibration is successful.
How long does TPMS calibration take Honda Civic?
about 30 minutes
Once you start the recalibration process, it takes about 30 minutes of driving between 30-65 miles per hour. Then it will stop automatically, and your tire pressure monitoring system is good to go.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
How do you recalibrate TPMS on a Honda Civic?
Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle’s owner’s manual for more details or go to owners.honda.com for a downloadable. Version you.
How do I calibrate my TPMS?
Tire Pressure Monitoring System Calibration
- Pressing the TPMS button that is located on your steering column will start the process.
- Hold down the button until you see the indicator light blink twice.
- You’ll need to drive your vehicle for thirty minutes to re-calibrate the system.
Where is TPMS located on Honda Civic?
If your Honda is equipped with a TPMS button, you’ll find it to the left of the steering wheel. Press and hold the button until the warning light blinks twice.
How do you reprogram a Honda TPMS sensor?
Steps to Reset Honda TPMS Lights in Newer Models
- From the Home screen, select “Settings”
- Select your vehicle.
- Select “TPMS Calibration”
- Select “Calibrate”