How do you adjust the parking brake on a Subaru Forester?

Adjusting the Parking Brake on a Subaru Forester
To adjust the parking brake on a Subaru Forester, you will need to follow a few steps. Here is a step-by-step guide based on the information from the search results:
1. Access the Adjustment Mechanism: The adjustment mechanism for the parking brake on a Subaru Forester is located inside the rear brake drum. To access it, you may need to remove the rear wheels [[5]].
2. Locate the Star Adjuster: Inside the rear brake drum, you will find a star-shaped wheel, known as the star adjuster. This wheel is used to adjust the tension of the parking brake.
3. Adjust the Tension: To tighten the parking brake, rotate the star adjuster wheel upwards. Each click of the wheel will tighten the brake shoes against the rotor. Conversely, rotating the wheel downwards will loosen the tension.
4. Test the Parking Brake: After making the adjustment, it is important to test the parking brake to ensure it is functioning properly. Engage the parking brake and check if the vehicle remains stationary when parked on an incline. If necessary, repeat the adjustment process until the desired tension is achieved.
Please note that the specific steps and procedures may vary depending on the model year of your Subaru Forester. It is always recommended to consult the owner’s manual or seek professional assistance if you are unsure about any aspect of adjusting the parking brake.
I hope this helps! Let me know if you have any other questions.

How do you fix a loose parking brake?

Clean and lubricate the threads on the cable adjuster. Back off the cable adjuster nut on the passenger side at the vehicle’s midpoint or beside the parking brake lever. Loosen the adjustment so there is slack in the cable. Finally, tighten the nut until you feel a slight drag on the rear wheels.

Do parking brakes need to be adjusted?

At some point in the life of your brake system, it may be necessary to adjust the parking brake for a few reasons. Parking brakes use cables to transmit lever movement, and these cables stretch through use and as they age. A properly tensioned cable is an important part of firmly engaging a parking brake.

How much does it cost to adjust the emergency brake system?

The average cost for a Parking Brake System Adjust is between $56 and $71. Labor costs are estimated between $56 and $71. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

How does self adjusting handbrake work?

The self adjuster will adjust the brake shoes out when backing up or pulling on the parking brake as you back up. This expands as brake shoes wear. In both cases it allows the brake pedal to stay up as the brakes wear & the parking brake to work.

Why is my parking brake not holding on the hill?

Common reasons for this to happen: Brakes Out of Adjustment: The most common reason a hand brake does not hold a car on an incline is that the brakes are out of adjustment. Most hand brakes are self-adjusting, which means that they automatically adjust through use.

How do you adjust the parking brake on a Subaru?

Holding the lower nut steady you can turn the upper counter clockwise to to begin the adjusting. Going clockwise will tighten the cable while counterclockwise will loosen the cable adjustment. Take your time and retest to find the sweet spot of 7-8 clicks.

How tight should my parking brake be?

With the vehicle stopped, fully apply the parking brake. Full engagement should take place near or less than ½ the parking brake’s travel. If the parking brake travels more than half the distance, it could be too loose. If the parking brake fully engages in less than ¼ travel it could be too tight.

What controls the parking brake?

In most cases, a small lever in the cab is connected to a valve which can admit air to the parking brake cylinders to release the parking brake, or release the air to apply the brake. On some modern vehicles the valve is operated electrically from a lever or button in the cab.

How much does it cost to adjust parking brake system?

The average cost for a Parking Brake System Adjust is between $56 and $71. Labor costs are estimated between $56 and $71. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

How do you adjust the parking brake system?

The most common method of adjustment is to turn the rotor and adjust the star wheel until the shoes drag on the drum. Then, back off the adjusting star until the rotor turns free. But, some manufacturers specify the use of a drum diameter gauge to set the proper gap between the drum and shoe.