AHG Auto Service » Make » Honda » How do you adjust the headlights on a 2016 Honda Civic?

How do you adjust the headlights on a 2016 Honda Civic?

Adjusting the Headlights on a 2016 Honda Civic
To adjust the headlights on a 2016 Honda Civic, you can follow these steps:
1. Prepare for the adjustment: Wait until it’s dark outside so that you can clearly see the headlights projecting onto a wall. Remove any objects that do not travel with you on a daily basis, such as heavy machinery or special equipment. For a more accurate adjustment, ask a friend to sit in the driver’s seat while you work.
2. Locate the adjustment screws: The headlights of the Honda Civic use two adjustment screws to control the position of the headlights. These screws are typically located on the inside edge of the headlight housing.
3. Adjust the headlights: Use a screwdriver to turn the adjustment screws. Turning the screws clockwise will raise the beam, while turning them counterclockwise will lower the beam. Adjust the headlights until they are properly aligned and provide a clear view of the road without blinding oncoming drivers .
It’s important to note that if you recently installed aftermarket HID bulbs or made any modifications to the headlights, it’s recommended to have a professional adjust the headlights for you to ensure proper alignment.
Please keep in mind that these instructions are general guidelines, and it’s always a good idea to consult your vehicle’s owner’s manual for specific instructions on adjusting the headlights of your 2016 Honda Civic.

How do you adjust the headlight angle on a Civic?

If. You guys can see right here there’s a marking right here on this cowl piece on both sides. Your left and right side see that it says up-and-down.

How do I adjust my headlights up and down?

Find the adjusting screw and turn the screws slowly clockwise to raise the height of the lights or counterclockwise to lower them. As you make your adjustment, make sure the most intense part of the headlight beam hits at or just below the vertical centerline you taped on the wall. Adjust the horizontal field.

How do you adjust the headlights on a 2016 Honda Accord?

You can see it looks like kind of gear. You want to take your Phillips. And place it right in there. And you can just use a regular Phillips screwdriver I’m using a drill so to show you guys quicker.

How should I adjust my headlights?

How to Adjust Your Car’s Headlights

  1. Level the Vehicle. Before adjusting your headlights, make sure the car is level.
  2. Measure the Lights. Now that the car is level, turn on the headlights.
  3. Back the Car Away from the Wall.
  4. Adjust the Vertical Field.
  5. Adjust the Horizontal Field.
  6. Perform a Road Test.

How high should headlights be at 25 feet?

Headlamp Aiming Criteria: at the correct distance (25′), a reject would occur if the brightest portion of the beam is more than 4” to the right or more than 4” to the left of the vertical center line or more than 4” above or more than 4” below the horizontal center line.

Where are the headlight adjustment screws?

Open the bonnet and look at the back of the headlight casing, on most models there will be two adjustment screws/bolts on the rear or top of each headlight-locate them and grab the right tool in order to turn them (check the owner’s manual to be sure they’re the right ones).

Where is headlight adjustment screw?

Open the bonnet and look at the back of the headlight casing, on most models there will be two adjustment screws/bolts on the rear or top of each headlight-locate them and grab the right tool in order to turn them (check the owner’s manual to be sure they’re the right ones).

How do you adjust the headlights on a 2016 Civic?

Re-position your car within 25 feet of the garage or wall. Keeping the vehicle positioned in a straight line, adjust the position of the low beam’s intensity zones. Turn the top adjusting screws in a clockwise direction to raise and lower the beam. Use the side adjusters to move the beam left and right.

How do I correct my headlight aim?

Headlamp Aiming Criteria: at the correct distance (25′), a reject would occur if the brightest portion of the beam is more than 4” to the right or more than 4” to the left of the vertical center line or more than 4” above or more than 4” below the horizontal center line.

How do you adjust the headlights on a 2016 Honda Fit?

And you stick it into the slot right there. And if you read right there you turn it clockwise it’s going to bring it all down. If you do a counter clockwise it’s going to bring it up.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment