How do you adjust the camber on a Dodge Neon?

To adjust the camber on a Dodge Neon, you may need to use specific tools or kits designed for this purpose. Here are some options to consider:
1. Eibach Pro-Alignment Rear Camber Kit: The Eibach Pro-Alignment Rear Camber Kit is available for Dodge Neon models from 1995-1996 and 2003-2006 SRT-4. This kit allows you to adjust the rear camber of your Neon.
2. Camber Bolts: Another option is to use adjustable camber bolts. For example, the SPC Performance EZ Cam XR Adjustable Camber Bolts can be used to adjust the camber on a Dodge Neon.
3. Grinding Slots: According to one source, you can adjust the camber on a Dodge Neon by grinding slots in the knuckle and sliding the nuts in or outwards, depending on the desired camber adjustment.
It’s important to note that some sources mention that the caster and camber adjustments on a Dodge Neon may be limited or not possible without additional modifications or kits. Therefore, it’s recommended to consult a professional or refer to the specific instructions provided by the manufacturer of the camber adjustment kit you choose.
Please keep in mind that these suggestions are based on the information provided in the search results and may not cover all possible methods or kits available for adjusting the camber on a Dodge Neon.

Does tire alignment fix camber?

If the parts are in good condition being aligned normally, camber is adjustable. Excessive wear requires parts replacement to be properly aligned. Bent parts as well require replacement. If there is too much damage it may require a frame machine or never be factory specs again.

Why is my camber off?

Too much inward or outward tilt, also known as negative and positive camber, respectively, indicates improper alignment and will need to be adjusted. Worn bearings, ball joints, and other wheel-suspension parts may contribute to camber misalignment.

Do you adjust camber with car on ground?

To properly make camber adjustments, you need to make sure your vehicle is parked on a flat level surface. A garage floor is ideal, but any flat hard surface will work. Both tires must also point straight forward otherwise your measurements will be incorrect. A camber gauge is a fairly simple tool to understand.

What happens when camber is out?

When the camber angle falls out of the intended range, your vehicle may not handle as the automaker intended. This can cause potential safety issues. It can also cause excessive tire wear, costing you money.

What are the symptoms of incorrect camber?

If your car is drifting to the center of the road or towards the shoulder, then you could have an alignment problem. You may find yourself continually applying pressure to the wheel to keep the car moving straight. The reason a car pulls to one side is usually due to the camber of the wheels.

How do you check camber alignment at home?

To check camber, make sure the vehicle is parked on level ground. If not, factor the ground slope into the camber reading. Then place a straight edge across the wheel (use the inner lip if the outer is nicked or uneven) and use an angle finder to reveal camber.

How do you know if camber is out of alignment?

HOW DO YOU KNOW IF YOU NEED A WHEEL ALIGNMENT?

• Your vehicle pulls to one side.
• Uneven or rapid tire wear.
• Your steering wheel is crooked when driving straight.
• Squealing tires.
• Shaking or vibrating steering wheel.
• Your steering wheel feels loose or unresponsive.

What happens if camber is off?

Every vehicle has a specific camber alignment set by its manufacturer, which could be positive, negative, or zero camber. If the camber is out of alignment for a vehicle, it’ll affect the handling, tire wear, cornering performance, and vehicle safety.

How do you adjust camber alignment?

Some cars have an eccentric bolt to adjust camber. Others use shims to space the bracket a control arm is bolted to. Often this will adjust camber and toe-in. Shims are added equally to front and rear of the bracket to change camber and moved front to rear to change toe-in.

How do you fix unwanted camber?

Often the best fix for an issue with negative camber is getting your wheel alignment done. The cost of getting your wheels aligned is not too steep, but it will cost you a few pounds. One thing you need to remember is that alignment usually is done in pairs.