How do I turn on Toyota blind spot detection?

To turn on the Toyota blind spot detection feature, follow these steps:
1. Locate the BSM (Blind Spot Monitor) button on the dashboard, usually to the left of the steering wheel .
2. Press the BSM button to activate the Blind Spot Monitor.
3. You will hear a sound chime, and the lights on the side mirrors will illuminate for a few seconds.
Once the Blind Spot Monitor is turned on, it will help detect and alert you to vehicles in your blind spot while driving. If a vehicle is in your blind spot, the light on the corresponding side mirror will light up.
Remember that while the Blind Spot Monitor is a helpful safety feature, drivers should always look over their shoulder and use their turn signals. The Blind Spot Monitor is designed to enhance safety but has its limitations, so it’s important to remain vigilant on the road.
Please note that not all Toyota models have blind spot detection as a standard feature. The availability of blind spot monitoring may vary depending on the trim level and options package of the vehicle.
I hope this helps! Let me know if you have any other questions.

Why is my BSM not working?

In these cases, restoring the BSM to proper operation is as simple as cleaning any dirt or debris away from the sensors. Simply locate the sensors for Your vehicle and clean any mud or other debris away from the area. Blind-spot monitoring is one of the most useful tools for keeping safe.

Why are my blind spot sensors not working?

You should look for any signs of damage, dirt, or obstruction that may interfere with the sensor performance. You should also check the wiring and connectors for any loose or corroded contacts. If you find any problems with the sensors, you should clean them, repair them, or replace them as needed.

Where is the BSM button?

It has a BSM button on the dashboard. Usually to the left of the steering. Wheel. Press the button to turn the blind spot monitor. On it will illuminate a chime will sound.

Why did my blind spot detection turn off?

Since the blind spot stopped working on its own suddenly this can indicate a fault with one of the mirror sensors or a fault with the blind spot control module/ECU failing. Either one of these will create this sudden loss of the blind spot assist when nothing was done by you to turn it off.

How do I turn my BSM back on?

Instead. If you look to the left you will see a button indicating BSM. If you push it and the green light is on it is now active. And once you push it. Again. It’s off.

Why is my blind spot assist inoperative?

If the blind spot assist remains disabled, check fuses. If the fuse has not blown, check the blind spot sensor as it may need to be cleaned also check the connector on the sensor as it may be corroded.

What is the blind-spot monitoring symbol?

An amber warning symbol will light up on the sideview mirror on the side where the system has detected the vehicle. If you turn on your turn signal in that direction, this warning symbol will flash as an extra warning to not change lanes.

How do I turn on my Toyota blind spot monitor?

In most Toyota vehicles, the BSM² w/RCTA³ systems can be enabled and disabled through the vehicle’s Multi- Information Display (MID). To do this, just navigate to the MID’s Settings screen, then find the BSM setting, then simply toggle it on or off.

Why is BSM off?

If the BSM OFF indicator light remains illuminated, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible. Some problem with the system including the BSM warning indicator lights is detected. A large deviation in the installation position of a radar sensor (rear) on the vehicle has occurred.

What does the BSM button look like?

It is part of a safety system and also includes the rear cross traffic alert function on some models. Both use the same radar sensors located. Inside the left and right sides of the rear bumper to