How do I reset my radio in my Chevy Silverado?

Resetting the Radio in a Chevy Silverado
If you need to reset the radio in your Chevy Silverado, there are a few methods you can try. Here are two commonly recommended methods:
Method 1: Resetting the MyLink System
1. Turn on the MyLink system in your Chevy Silverado.
2. Navigate to the Settings button on the touchscreen. It looks like a gear with the word “Settings” underneath.
3. Ensure that you are under the Systems tab on the top left of the touchscreen.
4. Scroll down to the bottom of the Systems menu until you see “Return to Factory Settings”.
5. Turn on your Chevy Silverado and remain parked.
6. Turn on the audio system.
7. Click and hold the radio power button for 10 seconds. This will bypass the dealer code that appears.
8. The stereo system will turn off. Turning the radio back on will reset your system.
– Alternatively, you can enter your dealer-provided radio code to reset the system. If a code appears when you turn on your Chevy Silverado, reenter the code to reset the system.
Method 2: Resetting the Anti-Theft Radio
1. Turn the car ignition to the “ON” position.
2. Turn the radio off if it is on.
3. Press and hold the “Minute” button on the radio faceplate.
4. Release the “Minute” button once “000” appears on the radio display.
5. Press the “Minute” button again until the last two digits of the security code for your radio are displayed.
6. Press the “Hour” button until the first two digits of the security code are displayed.
7. Press the AM/FM button to enter the code.
8. The radio should now be reset and in a working state.
Please note that these methods may vary depending on the specific model and year of your Chevy Silverado. If you encounter any difficulties or if these methods do not work, it may be best to consult your vehicle’s owner’s manual or contact a Chevrolet dealership for further assistance.
I hope this helps! Let me know if you have any other questions.

How do you reset the touchscreen on a Chevy Silverado?

And what’s going to happen is. When we let go of the button the reset. Process when we see that screen right there when that changes you’re going to see. Everything starts to reset.

How do I reset my radio manually?

Press and hold down the audio system power button for at least 10 seconds. Use a paper clip or ballpoint pen to press the “system reset button.” The exact location varies by model and year, but it’s a small and unmarked hole that’s often near the volume knob. Wait a few minutes for the system to power back on.

How do I reset my car stereo without the reset button?

Disconnect the battery: One way to reset a factory stereo is to simply disconnect the battery. This will reset the stereo as well as any other electronics in the car. Just be aware that you’ll need to reset the clock and any other settings after doing this.

How do I restart my touchscreen?

We’re using Samsung. So the Samsung logo shows up on the touch screen. Now. You can see the touchscreen returned to normal State. And respond to your touch. Solution 2 is to remove the battery.

How do I reset my car radio to factory settings?

Then locate the power button on the radio. Which is typically located on the left side of the radio’s control panel. Once you have located the power button press and hold it for 20 seconds. While.

How do you reboot the Chevy infotainment system?

Do This First

1. Your vehicle must be in PARK to reset your system.
2. Press and hold the END CALL button on your steering wheel for about 10 seconds.
3. Then, turn your vehicle OFF, open the driver’s door and close the driver’s door. Wait for your displays to turn off completely.
4. Start your vehicle again.

How do I reset my Chevy radio?

Step 1: Click on the home button and search for “Settings.” Step 2: Scroll to “Factory Settings” Step 3: Select “Restore settings.” Step 4: Long-press the “Home button.” You can hold the button for about 10 seconds to start the reset.

How do you reset a Chevy control module?

And hold it there for 10 to 20 seconds. While still pressing the pedal down turn off the ignition. Continue holding the gas down for 10 more seconds. Then slowly release the pedal.

Why is my touch screen in my truck not working?

The touchscreen may be dirty or covered in fingerprints. If this is the case, clean it with a soft cloth and some glass cleaner. Ensure to avoid getting any liquid inside the stereo system. If the touchscreen is still not working properly, take it to a certified technician for repairs.

Can you reboot a car stereo?

Press and hold down the audio system power button for at least 10 seconds. Use a paper clip or ballpoint pen to press the “system reset button.” The exact location varies by model and year, but it’s a small and unmarked hole that’s often near the volume knob. Wait a few minutes for the system to power back on.