AHG Auto Service » Make » Acura » How do I reset my Acura TL security system?

How do I reset my Acura TL security system?

Resetting the Acura TL Security System
To reset the security system in your Acura TL, you have a few options:
1. Professional Assistance: You can contact a dealership or a qualified automotive locksmith to reset the system and provide you with a new key. They have the necessary equipment and knowledge to perform this task.
2. Disconnecting the Battery: Before seeking professional help, you can try disconnecting the battery as a preliminary step. This may help reset the security system.
3. Reset Code Cards: If you need to reset the codes for the premium sound and navigation systems, you can find the reset code cards supplied in the TL’s original paperwork. These cards contain the five-digit radio reset code and the four-digit navigation system reset code. If the cards are not available, you may need to explore other options.
4. Immobilizer Reset: If you need to reset the immobilizer, you can follow specific steps, such as turning the ignition switch to the ON position and holding down the unlock button on the key fob for 3 seconds.
5. Physical Key Reset: Another method involves using the physical key in the driver’s side door lock. By turning the key to the unlock position and then back to the lock position, followed by another turn to the unlock position, you may be able to disable the alarm and reset the immobilizer.
It’s important to note that these methods may vary based on the specific model year of your Acura TL, so it’s advisable to refer to the vehicle’s manual or consult with a professional for the most accurate guidance.
Remember, if you encounter any difficulties or are unsure about the process, it’s best to seek professional assistance to ensure the security system is reset correctly.

Will disconnecting battery reset anti-theft alarm?

Car alarms rely on the electronic component of the vehicle, and disconnecting the battery should both silence the siren and reset your alarm. Open up the hood, locate the battery, and with a wrench, remove the negative terminal. Then reconnect it after a minute has passed.

Why is my car stuck in anti-theft mode?

Method 1: Check the cylinder and key
Keep in mind that your key fob might not be dead, but the battery is simply not installed correctly. Step 2: Check the door lock cylinder. If your vehicle has been damaged, during an attempted break-in or theft or otherwise, the anti-theft system might have been triggered.

Why is my car stuck in theft mode?

Method 1: Check the cylinder and key
Keep in mind that your key fob might not be dead, but the battery is simply not installed correctly. Step 2: Check the door lock cylinder. If your vehicle has been damaged, during an attempted break-in or theft or otherwise, the anti-theft system might have been triggered.

What happens when your car goes into anti-theft mode?

Most vehicles with an anti-theft system come with ignition keys with a coded transponder chip that sends a signal to the receiver in the ignition switch. If the anti-theft system sends a no-go signal to the PCM, the engine computer will disable the ignition, fuel system, or starter.

How do I reset my auto theft system?

Start the Car with the Key:
Some vehicles have a system that recognizes the key’s chip or transponder. Insert the key into the ignition, turn it to the ‘On’ position (without starting the engine), and wait for a few moments. In some cases, this can reset the anti-theft system, allowing you to start the car.

How do I reset my Acura anti-theft system?

Using the keyleSSRemote system, or key fob, push down and hold the panic button. If You prefer, or if You do not have Your key fob, place Your physical key into the driver’s side door lock, and turn it to the unlock position. Hold this position fortwo seconds. The security system should now be reset.

How do I get my Acura TL out of theft mode?

Use the scan tool, or disconnect both of the battery cables from the battery(ground cable first, then the positive), then touch the cable ends together for 2 minutes. Reconnect the cables(positive cable first, then the ground cable connected last) and retest the operation of the vehicle.

How do I know my car is in anti-theft mode?

Most modern cars have a dash light that indicates that the anti-theft system has been triggered. The icon for the anti-theft system looks like a car and a lock combination. When this light is on and flashing (it will be either or blue), it will indicate that your car’s anti-theft system is activated.

What does it mean when a car is stuck in theft mode?

Most vehicles with an anti-theft system come with ignition keys with a coded transponder chip that sends a signal to the receiver in the ignition switch. If the anti-theft system sends a no-go signal to the PCM, the engine computer will disable the ignition, fuel system, or starter.

Does an Acura have an anti-theft device?

Here’s how to enter an Acura Radio Code and get back on the road in no time. What is the Acura Radio Code? Your Acura radio is equipped with an anti-theft system.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment