AHG Auto Service » Make » Chevrolet » How do I remote start my 2014 Chevy Impala?

How do I remote start my 2014 Chevy Impala?

To remote start your 2014 Chevy Impala, follow these steps:
1. Check if your key FOB has a “circle arrow” button at the top. If it does, your Impala is likely equipped with a factory-installed remote start.
2. Lock or re-lock your car using the key FOB.
3. Immediately press and hold the circle arrow button for 5 seconds.
4. You’ll notice the front and rear blinkers blink twice, and in a few moments, your Impala will start running.
5. When you’re ready to drive, simply put the key in the ignition and turn it to the on position.
Please note that if your Impala is not equipped with a factory-installed remote start, you may need to consider aftermarket options or consult with a Chevrolet dealership for further assistance.
I hope this helps! Let me know if you have any other questions.

How do you start a Chevy Impala with a remote?

Using Remote Start

  1. Find the looping arrow button on your key fob.
  2. Press it two times. The turn signals will flash to confirm the remote start worked.
  3. The vehicle will turn off after 20 minutes unless you stop the remote start before then or the vehicle is turned on.
  4. Press the brake pedal and the Power button to drive.

How do I know if my Impala has remote start?

Finding the Remote Start Button
To find out if you have the remote start option, you must first take a look at your key fob. The remote-start button is shaped like a curved arrow. If your key fob has this button, that means that your car is equipped with Remote Start.

What buttons do you press to remote start a car?

Press the lock button on your key fob before holding down the Remote Start button for at least four seconds. This should cause your lights to come on and the engine to start. Another reason for this sequence is that it prevents you from accidentally turning on your engine when your key fob is in your pocket.

Does 2014 Chevy Impala Limited have remote start?

The new Impala. Available adaptive remote start allows you to remotely start the car and heat or cool the interior. To start the car first aim the key fob at the car press and release the lock.

How do I activate remote start?

Once started remotely the engine will run for 10 minutes and then shut. Off. You can extend the running time for another 10 minutes by repeating the start procedure during the initial. Period.

How do I remote start my Chevy key fob?

And then holding down the remote start button. Now it is nice and remote remote start gotta unlock it again. And then you get in turn the key over and you are good to go.

How do I know if my Chevy is equipped to remote start?

Most Chevy vehicles have it, but some only make it available in higher trims. You can determine whether your car has Remote Start by looking for a curved arrow on your key fob. This is the Remote Start button, so if it’s not on your fob, your car won’t have it.

How do I use my key fob as a remote start?

And then it’ll relay. Be a delay it’ll flash again after it starts. And then you know it’s running and then once you want to turn it off you can hit unlock.

How do I make my Chevy remote start work?

Here’s how it. Works. If you’re within 197 feet aim your key fob at the vehicle depending on your vehicle. You may or may not need to press the lock.

How do I know if my car has remote start?

The key fob for your car will have a special button if your vehicle has a remote starter. The symbol for the remote start is usually an arrow making a partial circle, as seen above. However, take note that some vehicle brands might use a different symbol for remote start.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment