How do I put my Chevy Equinox in accessory mode?

To put your Chevy Equinox in accessory mode, you can follow these steps:
Push Button Start:
To put your 2018 Equinox in accessory mode, you can follow this method: Hit the push to start from the passenger side without touching the brake pedal and exit via the passenger door. This should keep the Accessory mode on for a few hours while you are not in the car.
Keyless Start:
If your vehicle isn’t moving, it will change to ACCESSORY mode until you shift into PARK. On vehicles equipped with Electronic Precision Shift, the vehicle will automatically shift to PARK and turn off. If your vehicle is moving, it will stay on and your instrument cluster will tell you to press the button again to turn your vehicle off. If you press the button again within five seconds, the vehicle will turn off and change to the ACCESSORY mode.
Service Mode:
Another method to keep the accessory power on without putting it in the dealer maintenance intended mode is by pressing and holding the vehicle power button WITHOUT your foot on the brake until it powers up the car (no drivetrain power, functionally equivalent to ‘ACCessory’ position on old-tech cars). You have to power it back off and then power it up the proper way before driving off.
I hope these methods help you put your Chevy Equinox in accessory mode!

What is the difference between accessory mode and on mode?

ACC mode sends power to accessories only, On sends power to everything and some cars electrical systems can be damaged that way. Q: Why do car key ignition switches have ACC mode and on mode? The ACC seems redundant. A: Only way to power ACCessories without having the DRL, ignition, instrument panel, and HVAC running.

How do I get my car out of accessory mode?

Accessory or On mode: Press ENGINE START/STOP once without pressing the brake pedal for Accessory mode. Press it again for On mode.

Is it okay to keep car in accessory mode?

In general, you should avoid using accessory mode for longer than two hours to avoid battery drain. The way to activate accessory mode often depends on the make and model of your vehicle. Some will require you to turn the vehicle’s ignition switch to “ACC,” while others need a specific button or lever to be activated.

Which mode is accessory mode?

ACC / ACCESSORY (ACC ON)
The second position is the ACC/ACCESSORY position, which allows you to use your radio, windshield wipers, and other accessories while the engine is off. This position should also be used in the event that your vehicle is being pushed or towed. In this position, the engine is off.

How do I put my Chevy in accessory mode?

Keep your foot off the brake. And hold the accessory button down for 10 seconds.

How do I turn on accessory mode in my car?

Started. But if you want to shut it. Off. You can hit that button again and i’ve just shut everything. Off all right now if you want it to start.

Do cars with push button start have accessory mode?

If you want to start the engine, you step on the brake pedal and push the start button. If you want to go into accessory mode, you don’t step on the brake pedal and push the start button. That’s all there is to it.

Does accessory mode burn gas?

If the car is not started and it’s just in the accessory position, then you don’t burn any gas. You are simply running your battery down.

What is the accessory mode on the ignition?

The second position is the ACC/ACCESSORY position, which allows you to use your radio, windshield wipers, and other accessories while the engine is off. This position should also be used in the event that your vehicle is being pushed or towed. In this position, the engine is off.

Does accessory mode burn fuel?

If the car is not started and it’s just in the accessory position, then you don’t burn any gas. You are simply running your battery down.