How do I know what Ford rear axle I have?

To determine what Ford rear axle you have, there are a few methods you can use:
Method 1: Visual Identification
One way to identify your Ford rear axle is by visually inspecting it. Different models and years have distinct features that can help you determine the axle type. For example, the Ford 9-inch version used in the 1960 F-100 truck has one-piece tubes with a weld on the top of the axle center section and oval-shaped dimples on the rear section. Other models may have different features, such as dimples on the housing or oil drain plugs.
Method 2: Axle Code on Door Sticker
Another method is to locate the VIN tag on the rear face of the driver-side door. Look for a box labeled “axle” on the tag, which contains the axle code. You can then consult a code listing, similar to the one found on Drivetrain, to determine the specific axle type. The door sticker is the primary identification tag for the vehicle and provides valuable information about its components.
Method 3: BOM Number
If you have the Bill of Materials (BOM) number for your axle, you can use the Dana Aftermarket Media Library to identify the specific axle and its components. This resource allows you to search for the BOM number and access relevant literature for identification purposes.
Method 4: Consultation with Experts
If you’re still unsure about the identification of your Ford rear axle, you can reach out to differential experts who can provide guidance and assistance. They can help you identify the axle based on the information you provide, such as the vehicle model, year, and any available codes or tags.
Remember, it’s important to verify the information provided by visually inspecting the axle or consulting official sources for accurate identification.

How do you decode a Ford rear end tag?

Gives most of the Fords will have the same format. So your super duties your f-150 is your Mustangs. Pretty much follow the same setup. You’ll have the ratio you’ll have the differential. Diameter.

How do I identify the 8.8 Ford rear end?

You can identify the Ford 8.8-inch rear by its rear cover. It has a thin metal or plastic 10-bolt cover, and the bolts are 7/16-inch thread. The cover is not quite square, measuring about 101/2 inches high by 11 inches long. The 8.8-inch pinion shaft is 15/8 inches and has 30 splines.

How do I find my axle code?

To find the axle code:

1. View the Safety Compliance Certification Label on the driver’s side, front or rear door panel.
2. Find the word “AXLE” under the bar code.
3. Find the two-digit code under “AXLE.”

Can you tell gear ratio from VIN?

You don’t. That information is not contained in the VIN, UNLESS a specific model only gets one rear end ratio. VIN tells country of manufacture, vehicle make, class, engine type, size, date of manufacture, plant and serial number. That is the ONLY information contained by the VIN.

How to tell the difference between Ford 8.8 and 9.75 rear end?

On the passenger’s side upper and lower corners, there’s two semi-circular divots that can easily be seen when looking at the cover from straight on. While the Super 8.8’s cover has a bulge for the ring gear, it’s not anywhere near as pronounced as the 9.75’s.

What Ford rear end do I have?

The ID tag can be your friend. It will tell you the gear ratio, rearend style, and whether it has limited-slip. Also on the tag is an ID number, which, until 1985, included four to five letters, no numbers. Almost all 8.8s—and all post-1986 Ford rearends—have letters and numbers.

How do I identify my Ford model?

You can find your vehicle’s specifications on the door jamb label, your window sticker, a Build Sheet, or a VIN Decode Letter.

How do I identify a rear axle?

It’s worth noting that rear axles can sometimes be positively identified by a casting number and date stamped on the differential cover or axle tube.

How do I identify my Ford axle?

FORD AXLE IDENTIFICATION TAGS
The location of Ford identification tags will vary by model, but most are located on a carrier cover bolt. The Ring Gear Size (differential type) and the Gear Ratio will be printed on the tag (as well as whether or not the differential is limited slip).

How do you read a Ford rear axle tag?

Gives most of the Fords will have the same format. So your super duties your f-150 is your Mustangs. Pretty much follow the same setup. You’ll have the ratio you’ll have the differential. Diameter.