Signs of a Bad Subaru CV Axle
If you suspect that your Subaru CV axle may be bad, there are several signs you can look out for:
1. Clicking sound when turning: One of the most common signs of a bad CV axle is a clicking sound that occurs when you turn the vehicle. This noise is typically loud and occurs when the CV joint has been worn to the point of failure.
2. Shaking or shuddering sensation: Another symptom of a bad CV axle is a shaking or shuddering sensation, particularly when accelerating. This vibration is often felt in the steering wheel or throughout the vehicle.
3. Grease on the inside of the tires: If you notice grease collecting on the inside edge of the tires, it could be a sign of a failed CV axle. When a CV axle fails, lubricant can leak from the axle and accumulate on the inside of the tire.
It’s important to note that if you experience any of these symptoms, it’s best to schedule a service appointment with a qualified technician to diagnose and address the issue promptly.
I hope this helps! Let me know if you have any other questions.
Contents
- What are the symptoms of a CV axle going out?
- How much does it cost to replace a CV axle on a Subaru?
- How do you diagnose a bad CV axle on a Subaru?
- Can I drive if my CV axle is bad?
- What happens when a CV axle fails while driving?
- Can a CV axle go bad without leaking?
- How long do CV axles last Subaru?
- How do you check for a bad CV axle?
- Can you drive with a failing CV axle?
- Can you still drive with a bad CV axle?
What are the symptoms of a CV axle going out?
4 Signs You Have A Bad CV Axle
- Clicking/Ticking Sounds. A loud clicking or ticking sound when turning your vehicle is one of the most common symptoms of a bad CV axle.
- Grease On The Inside Of Your Wheel.
- Vibrations That Worsen With Increased Speed.
- Knocking Sounds.
How much does it cost to replace a CV axle on a Subaru?
The cost of parts ranges between $760 and $1,030, while labor cost is between $170.00 and $180. Replacing a single axle usually takes about 1.5 to 3 hours, so replacing all four others can take up to 12 hours, which increases the cost if you factor in both parts and labor. However, replacing all four axles is optional.
How do you diagnose a bad CV axle on a Subaru?
But I don’t get much noise but then if I turn. It. You hear that Rumble. And feel that Rumble that’s the u-joints. Trying not to break in half. So. If when you’re driving straight.
Can I drive if my CV axle is bad?
A boot seals the CV, and this boot is not resistant to damage. Whenever this happens, the joint will wear out and fail. If you drive a car with a damaged CV, the joint will deteriorate more, making driving impossible. You’ll be at risk of getting into an accident.
What happens when a CV axle fails while driving?
The Constant Velocity is sealed by a boot. This boot may get damaged, and when this happens, the joint will wear out and eventually fail. If you drive a car with a damaged CV, the joint will disintegrate further, making driving impossible. You’ll not be able to control the vehicle and may get involved in an accident.
Can a CV axle go bad without leaking?
All moving parts, no matter how well lubricated, will eventually fail due to a combination of wear and fatigue. It’s a little unusual for a CV joint to fail if the gaiter (rubber bellows) around the joint has also not failed, but it may well have failed and been replaced in the past before you owned the car.
How long do CV axles last Subaru?
The lifespan of your CV axle is typically fairly long, withstanding 80,000 to 100,000 miles under regular driving conditions. If you begin hearing a loud, rhythmic clicking noise as you turn, it’s a good sign the axle is failing.
How do you check for a bad CV axle?
The third symptom is the leaking CV axle boot you’ll usually find grease build on the inner portion of the tires. Suspension parts and on the ground when this happens dirt moisture.
Can you drive with a failing CV axle?
The Constant Velocity is sealed by a boot. This boot may get damaged, and when this happens, the joint will wear out and eventually fail. If you drive a car with a damaged CV, the joint will disintegrate further, making driving impossible. You’ll not be able to control the vehicle and may get involved in an accident.
Can you still drive with a bad CV axle?
A boot seals the CV, and this boot is not resistant to damage. Whenever this happens, the joint will wear out and fail. If you drive a car with a damaged CV, the joint will deteriorate more, making driving impossible. You’ll be at risk of getting into an accident.