How do I identify my Subaru engine?

Identifying Your Subaru Engine
If you need to identify your Subaru engine, there are a few methods you can use:
1. Subaru Engine Code:
– Subaru uses a four or five character code to identify all of their engines. These codes can be found on the engine itself and can help you identify the engine’s specifications and factory code. The first 11 digits indicate the engine’s specifications, and the last four digits indicate the code specific to your engine. You can report this code to your Subaru dealer or mechanic to determine what it means.
2. Vehicle Identification Number (VIN):
– You can also get most of the information you’ll need from your vehicle identification number (VIN). The VIN is typically located in the left front corner of the dashboard, driver’s door jam, various body panels, and engine components. The VIN can provide information about the model, platform, engine, and transmission of your Subaru.
3. Other Identifying Numbers:
– Some Subaru engines may have a serial number located on the machined boss on the left side of the clutch housing. This number can also be used to identify the engine.
It’s important to note that each Subaru model may have different engines designed for different purposes, so it’s essential to accurately identify your specific engine before proceeding with any service or maintenance.
If you have any further questions or need additional assistance, feel free to ask!

How do I know what engine my Subaru has?

Placement isn’t enough ej25. And ej20 is just a general term for displacement. So we need to take the next step and figure out what type of throttle body it has. So this engine.

How do I find my engine identifier code?

The engine code letters and the consecutive engine number are always on the engine, although they are not necessarily visible to you, but are stamped into the block and are usually difficult to read. The code is therefore often written on a sticker (the vehicle data carrier), which is attached to the timing belt cover.

Which Subaru has 6-cylinder engine?

The Subaru XT was the first Subaru to possess a 6 cylinder engine and this was an ER engine. Since then, Subaru has created two other 6 cylinder engine ranges: the EG engine and the EZ engine.

What cars have the EJ25?

EJ25

• 2006-2014 Subaru WRX.
• 2004-Present Subaru STI.
• 98-2011 Impreza.
• 1996-2010 Legacy.
• 1996-2012 Legacy GT.
• 1996-2012 Outback.
• 1998-2010 Forester.
• 1998-2013 Forester XT.

Where is the engine code on a Subaru engine?

The engine number is located on the right hand side that is below the turbo. So below the turbo as you can see there is where you can locate engine number that’s the engine number you’re seeing there.

Is my engine code in my VIN number?

The fourth through eighth digits describe your vehicle’s model, body type, restraint system, transmission type, and engine code. The ninth digit is the check digit, which is used to detect fraudulent VINs.

How do I know if my Subaru is 4 or 6 cylinder?

If it has eight you have an eight cylinder. If it has ten. And you have a ten cylinder. And you might even have a v12 i don’t know if you have that kind of crazy of a car it’s up to you.

How do I know what cylinder engine I have?

Look under the hood to determine what engine your car has.
Open the hood of your vehicle and prop it up. You can tell how many cylinders your car has by how many spark plugs are coming out of the engine. Most engines will also have a label on the top that tells you how many cylinders your car has (V4, V6, V8, etc.)

What are the different Subaru engines?

2.0 liter 4 cyl DOHC engine w/ 200 hp and 151 lb-ft torque [BRZ] 2.5 liter 4 cyl DOHC engine w/ 173 hp and 174 lb-ft torque [Forester, Outback, Legacy] 2.0 liter 4 cyl DOHC turbocharged engine w/ 250 hp and 258 lb-ft torque [Turbo Forester] 2.0 liter 4 cyl DOHC turbocharged engine w/ 268 hp and 258 lb-ft torque [WRX]

What is the code for the Subaru 2.5 engine?

The 2.5-Liter WRX Engine: EJ255.