How do I identify my Subaru block?

How to Identify Your Subaru Block
To identify your Subaru block, you can use the following methods:
1. Check the VIN: The Vehicle Identification Number (VIN) can provide information about your Subaru block. The VIN is typically located in several places, including the left front corner of the dashboard, the driver’s door jam, various body panels, engine components, and your registration and title. The first two or three positions of the VIN indicate the Manufacturer ID code, with the first position representing the country code and the second position representing the manufacturer. For example, “S” represents Subaru as the manufacturer.
2. Look for engine codes: Some Subaru engines have a code printed directly on the engine. This code helps identify the engine’s specifications and factory code. The first 11 digits indicate the engine’s specifications, while the last four digits indicate the code specific to your engine. If you find an engine code on your Subaru block, you can contact your Subaru dealer or mechanic to decode it and provide you with more information.
3. Check for serial numbers: Subaru blocks may have serial numbers stamped on them. These serial numbers can be found in different locations on the engine block, such as the center timing belt cover or the left rear side of the engine block. However, please note that the visibility and legibility of these serial numbers may vary, especially on older engines .
Remember, if you are having difficulty identifying your Subaru block, it is recommended to consult with a Subaru dealer or mechanic who can provide you with accurate information based on your specific vehicle.
I hope this helps! Let me know if you have any other questions.

What is the difference between a long block and a short block Subaru?

Key Differences Between Long and Short Blocks
Short blocks include, and fully assembled, the block, crank, rods, and pistons. Short blocks may include other items such as the camshaft, timing chain, and covers. Long blocks are short blocks with the heads and typically the valvetrain installed.

What are the different types of Subaru blocks?

Subaru Closed Deck Engines

• Open Deck. Open-deck engines are the most common type in the Subaru range due to lower mass production costs.
• Semi-closed Deck. Semi-closed deck blocks are more common in Subaru’s turbo range.
• Full Closed Deck. Finally, we have the fully closed deck design.

Which Subaru has 6 cylinder engine?

The Subaru XT was the first Subaru to possess a 6 cylinder engine and this was an ER engine. Since then, Subaru has created two other 6 cylinder engine ranges: the EG engine and the EZ engine.

What are the different Subaru engines?

2.0 liter 4 cyl DOHC engine w/ 200 hp and 151 lb-ft torque [BRZ] 2.5 liter 4 cyl DOHC engine w/ 173 hp and 174 lb-ft torque [Forester, Outback, Legacy] 2.0 liter 4 cyl DOHC turbocharged engine w/ 250 hp and 258 lb-ft torque [Turbo Forester] 2.0 liter 4 cyl DOHC turbocharged engine w/ 268 hp and 258 lb-ft torque [WRX]

Where is the engine block number on a Subaru?

On top of the block, just under where the intercooler goes to the intake manifold, there are two numbers. One of them is the engine number, the other is the crankcase number.

Is there a VIN number on the engine block?

The VIN may be stamped on the engine block in a visible location such as the front near where the serpentine belt runs or near the rear of the engine. Sometimes, it might be obscured under an engine cover that needs to be removed first. This number is either cast into the block or etched in after manufacturing.

Where can I find the engine block number?

The engine serial number is on a metal plate attached to the block, typically found on the left-hand side of the engine. The position of the engine plate varies across different engine series.

What is the name of the Subaru engine?

Low Profile. With pistons moving horizontally, the SUBARU BOXER® engine has a flat, low profile, almost perfectly symmetrical, for a well-balanced vehicle. Its low profile can provide a lower center of gravity than other designs, helping provide quick handling response and flat, confident cornering.

How do I tell what Subaru engine I have?

And on the driver’s. Side uh front Tower here there’s a build tag which has the VIN here which I’m partially covering up for you. But um two series uh sorry two um two lines.

How do I know if my Subaru is 4 or 6 cylinder?

If it has eight you have an eight cylinder. If it has ten. And you have a ten cylinder. And you might even have a v12 i don’t know if you have that kind of crazy of a car it’s up to you.