How do I identify my Ford leaf springs?

To identify your Ford leaf springs, you can follow these steps:
Step 1: Look under the vehicle
– Start by looking under your Ford vehicle to locate the leaf springs.
– The leaf springs are a stack of bowed, narrow strips of steel.
– They can be found on the front or rear end, either at the bottom or top of the axle, depending on your Ford model.
Step 2: Check for signs of damage or wear
– Examine the leaf springs for any signs of damage, such as corrosion, cracking, or breaking.
– If your leaf springs are sagging or showing signs of wear, they may need to be replaced to avoid unsafe driving conditions and costly repairs.
Step 3: Determine the type of leaf springs you need
– The type of leaf springs you require depends on how you use your Ford truck.
– If you mostly drive your vehicle on the highway and don’t do significant hauling or towing, a standard OEM replacement kit will provide sufficient support.
– However, if you frequently exceed maximum ratings or have heavy-duty hauling or towing needs, you may want to consider heavy-duty leaf springs.
Step 4: Consult a professional or use online resources
– If you’re unsure about the specific leaf springs for your Ford model, you can consult a professional at a Ford dealership or an automotive parts store.
– They can help you identify the correct leaf springs based on your vehicle’s specifications.
– Additionally, you can use online resources such as TruckSpring.com or Ford OEM replacement leaf spring websites to find the appropriate leaf springs for your Ford .
Remember, it’s always a good idea to consult with an expert or refer to the manufacturer’s recommendations to ensure you select the correct leaf springs for your Ford vehicle.

How do you know which way a leaf spring goes?

Should it be bowed upward like smiling flat or downward like frowning. While many manufacturers designed their springs to be smiling. Some like chrysler rear springs.

Where is the part number on a leaf spring?

on the outside of the spring clip. On springs without clips and with hooks, our part number is stamped on the outside of the hook. All other springs are stamped in a visible location on one of the spring leaves.

Do leaf springs have a direction?

Re: Front Leaf Springs – Are they directional when installin
With a stock axle you want eye above in front/below in back. With newer axle you want eye below in front/above in back. If your springs are totally symetrical( both eyes up) they are chevy springs and you may need to use caster shims to make corrections.

Is there a front and back to leaf springs?

Do leaf Springs have a front and a back when installing? Expert Reply: Double eye leaf springs like the part # e84SR do not have a front or back designation. Slipper springs like the part # e29SR do have a front and back.

How do I find my leaf spring code?

The rear leaf spring usually has either a sticker, or the spring code and part no. actually engraved into the spring itself. If you have rear coil springs, they are probably on a tag like the front springs.

What do the numbers on springs mean?

The first number is the spring rate. This means that it requires 450 pounds of force to compress it one inch from a preset position. The preset position varies between manufacturers. The second number is the free stroke of the spring, meaning you can compress the spring 2.37” before it has coil bind.

How do you identify a spring?

Some of the tell-tale signs that you have an underground spring are an unusual amount of vegetation growth in one spot, a convergence of animal tracks, lots of insects, and areas that are persistently muddy or wet. All of these signs indicate that there is some unknown source of water in that area.

What is the number of leaf spring?

Most leaf springs will have between three and five leaves. However, for some heavy-duty applications, the leaf springs will have even more layers. Choosing leaf springs with too many leaves can create too much stiffness in the suspension. This situation makes the ride stiff and less controlled.

What size are my leaf springs?

First, start with the main leaf measuring from center of front eye along the curvature of the spring to center of center pin {A}, then measure along curvature of the spring from center of center pin to center of rear eye (B). Then measure width of spring.

How do I know what leaf springs I need?

The type of leaf spring used in a given vehicle can all depend on the weight capacity of the vehicle. For example, if the rear axle has a 6,000 lb. rating, the vehicle should be equipped with two 3000-lb. capacity leaf springs.