How do I identify my Ford Dana axle?

Identifying Your Ford Dana Axle
To identify your Ford Dana axle, you can follow these steps:
1. Check the Axle Tag: Look for a tag on the axle housing. The tag may contain important information such as the axle model, gear ratio, and other specifications. The tag is usually located on the driver’s side of the axle tube. It may be attached to a bolt or rivet.
2. Decode the Axle Tag: Once you locate the axle tag, you can decode the information on it to identify your Dana axle. The tag may include codes or numbers that correspond to specific axle models and features. You can refer to Dana axle identification charts or online resources to decode the information on the tag.
3. Use the Bill of Material (BOM) Number: Another way to identify your Ford Dana axle is by using the Bill of Material (BOM) number. The BOM number is a unique identifier assigned by Dana at the time of manufacture. It provides detailed information about the axle model, gear ratio, and other specifications. The BOM number is typically stamped on a build tag attached to the differential. You can use the BOM number to look up axle information in Dana’s database or other online resources.
4. Consult Experts: If you’re having trouble identifying your Ford Dana axle, you can consult with differential experts or professionals who specialize in axle identification. They can provide guidance and assistance based on their expertise and experience.
Remember, the specific location and format of the axle tag or BOM number may vary depending on the axle model and year of your Ford vehicle. It’s important to consult the appropriate resources or seek expert advice for accurate identification.
Please note that the search results provided by You.com do not provide specific step-by-step instructions for identifying a Ford Dana axle. However, the information from the search results can be used as a general guide to help you in the identification process.
I hope this information helps you identify your Ford Dana axle! If you have any further questions, feel free to ask.

How to tell the difference between a Dana 50 and a Dana 60?

now there’s a couple visual ways you can tell that you’re looking at a dana 50. 1st is there’s a very abrupt kick up in the casting on the dana 60. it’s a little more gradual. and the second is right here on the pinion.

How do I identify my Ford axle?

FORD AXLE IDENTIFICATION TAGS
The location of Ford identification tags will vary by model, but most are located on a carrier cover bolt. The Ring Gear Size (differential type) and the Gear Ratio will be printed on the tag (as well as whether or not the differential is limited slip).

What years did Ford use Dana 60?

2005-2016 Ford Dana Super 60 Front Axle Identification IDN-118. Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks.

What Ford trucks came with a Dana 60 front axle?

Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.

What years did Ford use Dana 50?

The solid axle Dana 50 was used in the Ford F-250 and the F-350 from 1999 to 2003. This axle was also the only OEM axle used in Four-wheel drive Ford Excursions.

How do I find my axle code?

To find the axle code:

1. View the Safety Compliance Certification Label on the driver’s side, front or rear door panel.
2. Find the word “AXLE” under the bar code.
3. Find the two-digit code under “AXLE.”

How do you tell if I have a Dana 70 or 80?

There should be a metal tag underneath one of the cover bolts, that will identify the axle model and ring/pinion ratio. If it’s not there, take a picture of the differential cover-a shop that specializes in truck or four-wheel-drive parts should be able to identify it by its unique shape..

How do you identify a Dana 70 Ford?

It can be identified by its straight axle tubes, 10 bolt asymmetrical cover, and a “70” cast in to the housing and is visually similar to the Dana 60. The majority of the Dana 70s are rear axles, however Dana 70 front axles do exist. Both front and rear axle variations were first offered in 1957.

How do I know what Dana differential I have?

Dana Spicer and Ford Differentials can be identified most accurately by the tag number or axle tube stamp.

What year Fords had a Dana 60?

During the 2001 model year, an SRW version of Dana 60 became available. By the start of the 2003 model year, the Dana 60 had completely replaced the Dana 50 in all F-Series Super Duty models although it did continue to be used for the Excursion SUV through 2005.