How do I identify my Chevy Dana 60 front axle?

Identifying a Chevy Dana 60 Front Axle
To identify a Chevy Dana 60 front axle, you can use the following methods:
1. Look at the Backing Plate Bolts:
– One simple trick for identifying if the axle came out of a Chevy, Dodge, Ford, GMC, or Jeep is to look at the backing plate bolts. Dana 60 axles on GMC, Chevy, and Jeep are all basically the same, and looking at the backing plate bolts can help determine the origin of the axle.
2. Check the Bill of Material (BOM) Number:
– All 1977-1991 Dana 60 Front Axles in GM 1 ton 4×4 trucks had a Bill of Material Number (BOM) assigned by Dana at the time of manufacture. The BOM number on 1984-1991 axles is stamped into the long tube of the axle housing. It is important to note that the BOM numbers are often faint and hard to read, and using a metal scraper is recommended to reveal the numbers most easily .
3. Visual Identification:
– The Dana 60 axle has a roughly D-shaped cover with 10 bolts and is approximately 12 1/8 inches wide. It is found in the front or rear of numerous Chevy, Dodge, Ford, Jeep, and International 3/4- and 1-ton trucks. The front Dana 60s came in both kingpin and ball joint configurations.
It’s important to note that these methods can help in identifying the Chevy Dana 60 front axle. If you need further assistance, you can also consult with experts in the field for more accurate identification.
I hope this helps you in identifying your Chevy Dana 60 front axle! If you have any more questions or need further assistance, feel free to ask.

How do I know what kind of Dana axle I have?

There should be a metal tag underneath one of the cover bolts, that will identify the axle model and ring/pinion ratio. If it’s not there, take a picture of the differential cover-a shop that specializes in truck or four-wheel-drive parts should be able to identify it by its unique shape..

Where do I find my GM axle code?

you guessed it, Axle and Differential specs. The GM RPO Codes label is usually located inside the glove box or on the Driver’s Side Door Jamb (on the B-Pillar). The silver placard will be labeled “Service Parts Identification” and includes a bunch of three-digit codes.

Did GM use a Dana 60?

GM used a Dana 60 rear axle in many 1967-1972 Heavy 1/2 ton and 3/4 ton 4×2 trucks.

How do I know what Chevy axle I have?

To find the axle gear ratio of any GM vehicle, locate the RPO sticker (typically located in the glove box) and write down any codes starting with F, G, or H.

How do I identify my Chevy front differential?

Information about Differentials in GM vehicles can usually be obtained by looking at the RPO or “Regular Production Option” codes contained in the Service Parts Identification tag in the glovebox or the driver’s side door jamb (B-Pillar).

Are all Dana 60 front axles the same?

There are three major variations of the Dana 60 axle used in the 1960s to 1980s. GMC, Chevy, and Jeep are all basically the same. Dodge and Ford are different.

When did Chevy use Dana 60?

The Model 60 as used by GM from 1977 to 1991 has very durable greaseable king pins and disc brakes. The wheel bearings are serviceable and the dead-spindle configuration allows the use of lockout hubs.

What Chevy trucks came with a Dana 60 front axle?

• 1964–1977 Chevrolet and GMC 3/4-ton pickups.
• 1975–1987 Chevrolet and GMC 1-ton pickups and Suburbans.
• 1979–2012 Chevrolet and GMC 1-ton vans.
• 2002–2005 Chevrolet and GMC 1/2 + 3/4 Ton pickups and Suburbans with Quadrasteer.

What is the bolt pattern on a Dana 60 front axle?

Dana 60 Brakes
Ford Super Duty axles have a metric 8-on-170mm wheel-lug pattern, but they can be converted to 8-on-6.5-, 5-on-5.5-, or 6-on-5.5-inch patterns. Most other Dana 60 front axles feature the common 8-on-6.5 1-ton lug pattern.

How do I identify my Chevy Dana 60?

Many Dana axles have the model ID cast into the fins or centersection. Look for a “44” or “60” cast into the reinforcement ribs. The number can usually be found on the lower right side rib below the differential cover, but it may also be found on other ribs or on top of the main cast structure.